All orders are typically shipped within 24-48 hours. UPS / FedEx Expedited shipping cutoff is 3pm Eastern Time M-F


****We will be closed Monday May 27th-28th in observance of Memorial Day. Customer Service and Technical support will not be available until Wednesday the 29th**** Orders will continue to ship on Tuesday the 28th.

Build A Custom AC Hose

The custom a/c hose build page is to allow customers to purchase barrier hose by the inch with two fittings. The page will give us the information necessary to ship a hose that is crimped and ready to install. We use a bubble style crimper that allows us to guarantee the hose will not leak when using any automotive refrigerant. Please use the images to input the correct information when designing your custom hose. The webpage is setup to measure the hose by the inch, and add two fittings (one at each end) if you need an inline port you will have to call or email us to place the order. If you need rubber replaced that is attached to a hose manifold (two hoses with one fitting at one end ie: a compressor connection at one end and two separate connections at the condenser and evaporator) please email us a picture of the hose assembly for a price. If an aftermarket hose assembly is not available you can ship us the line to be rebuilt. We can quote the cost via email, please provide make, model, engine size, and year of the vehicle. We do not accept returns or exchanges on custom made hoses, please be sure your hose is correct prior to purchase. **PLEASE ENSURE YOUR ORDER ACCURACY BY SEARCHING THE PART NUMBERS BEFORE SELECTING FITTINGS ON THE CUSTOM HOSE PAGE***

Start building your custom hose

A) Select The Hose Length & Type*

1. Select the size hose you need #6=5/16, #8=13/32, #10=1/2, and #12=5/8. The listed measurements are the inside diameter of the hose.

2. Measure the rubber length of your hose. Do not measure the fittings or the fitting tube, measure the crimp sleeve (ferrule) to the crimp sleeve. Figure 1 (ie; 9 inches of rubber)

B) Select The Left Side Hose Fitting

3. Select the left side fitting for your custom hose. Please browse the website before selecting the details of the new hose. Figure out which two fittings will be needed to make the hose, write down the part numbers and fitting detailed description. After gathering the necessary fitting information you can select the left side fitting.

C) Select The Optional Inline Splicer

D) Select The Right Side Hose Fitting

4. Place your hose so the fitting is pointing at the 12 o’clock position. If one or both fittings are straight the clocking of the fittings is not necessary. Leave the left side clock setting at the default choice. If you have a straight fitting with a port and require the port to be clocked please email your order in directly to avoid any errors.

5. Select the right hose fitting, and then select the clock position of that fitting. The fitting clock position is necessary so the new hose will not be twisted when installed on the vehicle.



The New Hose Will Include New Orings

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page