We can custom make any fitting. Just call or email with the specifications of the fitting that you need. Below are examples of fittings that we have made for customers. **There are no returns authorized on custom made fittings**
Sort by:
Show:
Custom Fittings Made by us on RequestExpansion Valves

Inline Orifice Tube Repair Kit

This inline orifice tube repair kit allows you to move your orifice tube anywhere within your liquid line. The crimp sleeves of the kit crimp to # 6 standard barrier...
$21.99
Custom Fittings Made by us on RequestProducts

# 12 27mm Female Oring GM Accumulator to #10 Male Insert Oring

It is a #12 27mm Female oring nut for a GM Accumulator that goes to a #10 Hose Male Insert Oring Fitting. It is a BL9308 and ATC1803
$25.00
BH12Custom Fittings Made by us on Request

# 12 27mm Female Oring Fitting to a # 10 Hose

This a # 12 27mm Female Oring fitting that steps down to fit a # 10 hose. We use part numbers BL9308 and BL6603 to make this fitting.
$22.50
Custom Fittings Made by us on RequestProducts

#12 Female Oring to #10 Male Insert Oring Fitting

This is a custom fitting that was made for a customer. It is a #12 Female Oring fitting welded to a #10 Male Insert Oring Fitting
$25.00
Custom Fittings Made by us on RequestProducts

# 12 180 Female Oring Fitting to # 10 hose

This is a #12 Female Oring 180 Degree fitting that steps down to a #10 hose. In order to make this fitting, we modify a BL1934 to have a #10...
$22.50
Custom Fittings Made by us on RequestProducts

# 6 Female Oring to # 6 Female Oring 90 Degree Fitting

It is a # 6 Female Oring 90 Degree Adapter that goes to a # 6 Female Oring. Normally this fitting is Female Oring to Male Insert Oring.
$18.50
BH12Custom Fittings Made by us on Request

# 12 Male Oring to #10 Male Insert Oring

This fitting goes from a #12 Male Oring straight to a # 10 Male Insert Oring. This fitting is necessary when replacing the VIR in GM applications with the CCOT...
$20.00
Custom Fittings Made by us on RequestProducts

# 10 Female Oring to # 10 Female Oring 90 Degree Fitting

It is a # 10 Female Oring 90 Degree Adapter that has a # 10 Female Oring on the other side.
$25.00
Custom Fittings Made by us on RequestProducts

# 8 90 Female Oring Fitting to # 6 Male Insert Oring

This is a # 8 Female Oring 90 Degree fitting that steps down to a #6 hose with a Male Insert Oring fitting.
$18.50
Custom Fittings Made by us on RequestProducts

# 12 90 Female Oring Fitting to # 10 Male Insert Oring

This is a #12 Female Oring 90 Degree fitting that steps down to a #10 hose with a Male Insert Oring fitting. In order to make this fitting, we put...
$22.50
Custom Fittings Made by us on RequestProducts

27mm Female Oring Stepped to a #10 Male Insert Oring

This is a 27mm Female Oring Accumulator Fitting Stepped down to a #10 Male Insert Oring Fitting
$28.50
Custom Fittings Made by us on RequestProducts

# 8 Female Oring to # 8 Female Oring 90 Degree Fitting

It is a # 8 Female Oring 90 Degree Adapter that has a # 8 Female Oring on the other side.
$20.00
Custom Fittings Made by us on RequestProducts

# 10 90 Female Oring Short Drop to #10 Male Insert Oring

# 10 90 Female Oring to #10 Male Insert Oring. Once the fitting is tightened on the compressor, from the bottom of the nut to the top of the fitting...
$25.00
Custom Fittings Made by us on RequestProducts

27mm Male Oring to # 10 Male Insert Oring Straight

This fitting is a 27mm Male Oring fitting to a # 10 Male insert oring. This fitting is ideal to connect to a metric accumulator and then it will allow...
$25.00
Custom Fittings Made by us on RequestProducts

# 14 Reduced Barrier Inline Splicer 6" in Total Length

This is an inline splicer. This splicer is for # 14 reduced barrier hose and has a total length of 6". This is ideal for motorhomes that have long sections...
$22.70
Custom Fittings Made by us on RequestProducts

Motorhome Suction Fitting Repair

We have had a lot of requests for this product. When technicians are removing the suction fitting on the compressor the fitting breaks. This #10 Female Oring fitting will screw...
$40.00
Custom Fittings Made by us on RequestProducts

Male Quick Disconnect Fitting with Low Side Charge Port Welded on

This is a custom fitting that was made for a customer. It is a #12 Male Quick disconnect straight with a low side charge port welded on.
$15.00
Custom Fittings Made by us on RequestProducts

# 14 Reduced Barrier Inline Splicer

# 14 Reduced Barrier Inline Splicer. This inline splicer is for #14 reduced barrier hose which has an inside diameter of 3/4" and outside diameter of 1 1/8"
$22.50
Custom Fittings Made by us on RequestProducts

# 10 90 Degree Bulkhead to # 10 Male Insert Oring Fitting

# 10 90 Degree Bulkhead to # 10 Male Insert Oring Fitting. This fitting can also be made into a straight fitting for the same price, just specify when ordering....
$29.25
Custom Fittings Made by us on RequestProducts

# 8 90 Degree Female Flare to # 6 Straight Female Oring Custom Fitting

This is a # 8 90 Degree Female Flare to # 6 Straight Female Oring Custom fitting. This fitting was developed for older Mustangs with a # 8 Male condenser...
$28.50
Custom Fittings Made by us on RequestProducts

# 12 Male Insert Oring to # 12 Female Oring 45 Degree

This is a # 12 Male Insert Oring to a #12 Female Oring 45 Degree Fitting
$25.00
Custom Fittings Made by us on RequestProducts

Custom Fitting Made with Customer's Manifold Fittings

The customer shipped us his original compressor manifold fittings and we welded male insert oring fittings onto his blocks. Now he is able to connects his fittings and use a...
$35.00
Custom Fittings Made by us on RequestProducts

We can make any fitting

We can custom make any fitting. Just call or email with the specifications of what you would like.
$15.00
Show:
Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page