Products

1997-2006 Ford Expedition Rear A/C Block Off Fittings

1997-2006 Ford Expedition Rear A/C Block Off Fittings Used to Block off Rear A/C1998-2006 Lincoln Navigator1997-2006 Ford Expedition

$48.70

Add to wishlist

1997-2006 Jeep Wrangler TJ Accumulator Support Bracket

1997-2006 Jeep Wrangler TJ Accumulator Support Bracket Powder coated in Matte Black Finish Most commonly used with the accumulator wrap around bracket, part number 915-2302

$19.99

Add to wishlist

1997-2006 Jeep Wrangler TJ Accumulator Wrap Around Bracket

1997-2006 Jeep Wrangler TJ Accumulator Wrap Around Bracket Powder coated in Matte Black Finish Most commonly used with the accumulator support bracket, part number 915-2303

$21.65

Add to wishlist

1998-1991 Chevy/Suburban GMC Tahoe Rear A/C Block Off Fittings

1998-1991 Chevy/Suburban GMC Tahoe Rear A/C Block Off Fittings Used to Block off Rear A/C, Standard #6 Male O-Ring and #8 Female O-Ring Fittings1988-1991 Chevrolet Suburban and Tahoe1988-1991 GMC Yukon...

$46.67

Add to wishlist

1998-2005 Crown Vic Condenser Adapters

1998-2005 Crown Vic Condenser Adapters. Allows you to connect a #8 Female Oring. Condenser inlet (Discharge) will require a #8 Female Oring (BL1302, BL1312, BL1322) Condenser outlet (Liquid Line) will require...

$85.00

Add to wishlist

1998-2006 Wrangler Cycling Switch

Jeep Wrangler low pressure cycling switch. The switch attaches to the accumulator drier. OE part number: 5015872AC

$24.99

Add to wishlist

1998-2006 Wrangler High Pressure Switch

Jeep Wrangler high pressure switch. Switch attaches to the hose from the compressor to condenser. OE part number: 4897617AA

$24.99

Add to wishlist

1999-2003 Ford Windstar Van Rear A/C Block Off Fittings

1999-2003 Ford Windstar Van Rear A/C Block Off Fittings Used to Block off Rear A/C1997 Ford Aerostar1999-2002 Mercury Villager1999-2003 Ford Windstar2005-2007 Ford Freestyle2008-2009 Ford Taurus X

$50.00

Add to wishlist

1999-2004 Ford Mustang Condenser Adapters

1999-2004 Ford Mustang Condenser Adapters commonly needed in Coyote Motor Swaps These adapters will fit the inlet and outlet on the condenser and convert it to a #8 Male Insert...

$78.00

Add to wishlist

1999-2006 Wrangler A/C Accumulator Drier

1999-2006 Jeep Wrangler A/C Accumulator Drier. The accumulator drier includes the 12mm switch port for the clutch cycling switch and the connections for the two suction hoses. Outer Diameter: 88mm ...

$39.99

Add to wishlist

1999-2007 F250 F350 With 5.9 Cummins Swap

1999-2007 F250 F350 With 5.9 Cummins Swap. For Fords with one alternator from factory. Kit Includes: Compressor manifold block with sealing washers Suction Line with No Rear AC Discharge line...

$249.99

Add to wishlist

1999-2013 Chevrolet LS Truck Motor Low Mount Compressor Bracket Kit

LS Truck Motor (Low Mount) This bracket system is designed to replace the factory A.C. compressor with an aftermarket Sanden 508 compressor. A.C. compressor is driven off the factory inner...

$225.00

Add to wishlist

2" Duct Hose Per Foot

2" Flexible Duct Hose This flexible duct hose can connect to defrost hook ups or vent louvers. It is designed to attach to a 2" round or oval outlet and...

$1.99

Add to wishlist

2.5 Inch Chrome Vent Dual Vein

2.5" Chrome Vent Dual Vein

$17.31

Add to wishlist

2.5 Inch Pro Series Round Vent

2.5 Inch Pro Series Round Vent. You can choose for the hook up to be 2.0" or 2.5"

$17.31

Add to wishlist

2.5 Inch Round Vent Holder

2.5" Round Vent Holder **Please note this is just the holder and does not include the vent. The vent is shown for illustrative purposes and can also be added to...

$5.76

Add to wishlist

2.5" Duct Hose Per Foot

2.5" Flexible Duct Hose This flexible duct hose can connect to defrost hook ups or vent louvers. It is designed to attach to a round or oval outlet that is...

$2.50

Add to wishlist

2000-2005 Excursion with 5.9 Cummins Swap

2000-2005 Ford Excursion with 5.9 Cummins Swap With Rear AC Kit Includes: Compressor manifold block with sealing washers Suction Line with Rear AC Discharge line with 10mm port for high...

$249.99

Add to wishlist

2000-2005 Ford Excursion F250 F350 Super Duty Accumulator Drier Adapter

2000-2005 Ford Excursion (F250 F350 with rear AC Only) Super Duty Accumulator Drier Adapter This adapter allows you to use the stock accumulator and run a new a/c line to...

$55.00

Add to wishlist

2000-2005 Ford Excursion Rear AC Block Off Fittings

2000-2005 Ford Excursion Rear AC Block Off Fittings Used to Block off Rear A/C with Female Suction on Rear Line

$50.00

Add to wishlist

2000-2006 Wrangler TJ Condenser Inlet Pad Fitting

This is a pad adapter to adapt to the inlet fitting of a 2000-2006 Wrangler TJ condenser. The adapter has a Male Insert Oring fitting #8 (3/4"-16) thread that will...

$45.00

Add to wishlist

2000-2006 Wrangler TJ Condenser Outlet Pad Fitting

This is a pad adapter to adapt to the outlet fitting of a 2000-2006 Wrangler TJ condenser. The adapter has a Male Insert Oring fitting #8 (3/4"-16) thread that will...

$45.00

Add to wishlist

2000-2014 Chevy Suburban, Tahoe/GMC Yukon Rear A/C Block Off Fittings

2000-2014 Chevy Suburban, Tahoe/GMC Yukon Rear A/C Block Off Fittings Used to Block off Rear A/C2000-2014 Cadillac Escalade2000-2014 Chevrolet Suburban and Tahoe2000-2014 GMC Yukon and Yukon XL

$50.00

Add to wishlist

2003-2007 Chevy GMC Trucks Condenser Inlet Pad Fitting

2003-2007 Chevy GMC Trucks Condenser Inlet Pad Fitting with M10 Switch port for OEM high pressure switch. The Male Insert Oring fitting is a #8 (3/4"-16) and will accept a...

$45.00

Add to wishlist

2003-2007 Ford F250 F350 Super Duty 6.0L Accumulator Drier Adapter

2003-2007 Ford F250 F350 Super Duty 6.0L Accumulator Drier Adapter This adapter allows you to use the stock accumulator and run a new a/c line to the compressor. The adapter...

$45.00

Add to wishlist

2003-2007 Ford F250 F350 Super Duty, 2000-2005 Excursion 6.0L Condenser Adapter

2003-2007 Ford F250 F350 Super Duty, 2000-2005 Excursion 6.0L Condenser Adapter This adapter will allow you to use the original condenser and run a new hose to the compressor. The...

$50.00

Add to wishlist

2003-2010 Chevy GMC Truck Accumulator and Condenser Pad Adapter Set

Adapter set for the accumulator drier and condenser inlet fitting found on 2003-2010 Chevy and GMC Trucks/ SUVs. This adapter set will allow you to easily make two custom compressor...

$78.00

Add to wishlist

2003-2013 Chevy GMC Truck Accumulator Outlet Pad Fitting Adapter

2003-2013 Chevy GMC Truck Accumulator Outlet Pad Fitting Adapter. The Male Insert Oring fitting is a #10 (7/8"-14) and will accept a Female Oring fitting

$40.00

Add to wishlist

2003-2013 Chevy GMC Truck Condenser Inlet and Outlet Pad Adapter Fitting

2003-2013 Chevy GMC Trucks Condenser Inlet and Outlet Pad Fitting. The Male Insert Oring fitting is a #8 (3/4"-16) and will accept a Female Oring fitting

$40.00

Add to wishlist

2003-2015 Chevy Express/GMC Savana Vans - Rear A/C Block Off Fittings

2003-2015 Chevy Express/GMC Savana Vans - Rear A/C Block Off Fittings Used to Block off Rear A/C2003-2015 Chevrolet Express Van2003-2015 GMC Savana Van

$46.67

Add to wishlist

2006-2011 Crown Vic Condenser Adapters

2006-2011 Crown Vic Condenser Adapters. Popular in F100 body swaps. Allows you to connect a #8 Female Oring. Condenser inlet (Discharge) will require a #8 Female Oring (BL1302) Condenser outlet...

$78.00

Add to wishlist

2007 - 2011 Jeep Wrangler JK Condenser Adapter Set

2007 - 2011 Jeep Wrangler JK Condenser Adapter Set This adapter set will allow you to make new hoses going to the stock condenser on a 07-11 JK. The adapters...

$85.00

Add to wishlist

2007 - 2011 Jeep Wrangler JK Expansion Valve Adapter Set

2007 - 2011 Jeep Wrangler JK Expansion Valve Adapter Set This set will allow you to hook up to the expansion valve mounted on the evaporator on a 07-11 JK...

$85.00

Add to wishlist

2007-2011 Jeep Wrangler JK Compressor Adapter Set

2007-2011 Jeep Wrangler JK Compressor Adapter Set DKS17D Compressor Type This set will allow you to make aftermarket hoses using the factory compressor. The adapter set has a #8 (3/4"-16)...

$75.00

Add to wishlist

2010-2020 Toyota 4 Runner Condenser and Expansion Valve Adapter Set

2010-2020 Toyota 4 Runner Condenser and Expansion Valve Adapter Set If you are doing a motor swap in a 4 Runner and need to run two new compressor hoses to...

$85.00

Add to wishlist

2011-2017 Ford Coyote 5.0L Compressor Adapter Set

Ford DKS-17DS, FS18, FS20 Suction and Discharge Block Fittings. These blocks fit the compressor in the 2011-2017 Ford 5.0L Coyote Engine. These blocks fit the FS18 and FS20 compressors found...

$59.50

Add to wishlist

2012-2016 Chrysler Town and Country Dodge Caravan Rear AC Block Off Fittings

2012-2016 Chrysler Town and Country Dodge Caravan Rear AC Block Off Fittings Used to Block off Rear A/C2012-2016 Chrysler Town and Country2012-2016 Dodge Caravan2012-2014 Volkswagen Routan

$43.33

Add to wishlist

2014-2022 Hemi 6.4L Denso 7SBH17C Compressor Adapter Set

2014-2022 Denso 7SBH17C Compressor Adapter Set The adapter set has a #8 (3/4"-16) and #10 (7/8"-14) Male Insert Oring Fitting. It will accept a #8 and #10 Female Oring Fitting

$78.00

Add to wishlist

2015-2020 Chevy Suburban/GMC Yukon/Escalade Rear AC Block Off Fittings

2015-2020 Chevy Suburban/GMC Yukon/Escalade Rear AC Block Off Fittings Used to block off rear ac in the following applications 2015-2020 Chevrolet Suburban/Tahoe 2015-2020 GMC Yukon/Yukon XL 2015-2020 Cadillac Escalade

$50.00

Add to wishlist

2018-2021 Ford Coyote 5.0L and Ford Godzilla Compressor Adapter Set

2018-2021 Ford Coyote 5.0L Compressor Adapter Set Compatible with DKS-20DT Compressors (6SBH14C, 7SAS17C, VCS17EC). The adapters have a #8 (3/4"-16) an #10 (7/8"-14) Male Insert Oring fittings that will accept...

$85.00

Add to wishlist

27mm Female Oring Stepped to a #10 Male Insert Oring

This is a 27mm Female Oring Accumulator Fitting Stepped down to a #10 Male Insert Oring Fitting

$28.50

Add to wishlist

3/4" Diameter Tube x 3/4" Hose Straight

Heater Hose Straight

$2.52

Add to wishlist

3/4" Diameter Tube x 5/8" Hose Straight

Heater Hose Straight

$3.40

Add to wishlist

3/4" Hose x 3/4" Hose Splicer - Straight

Heater Hose Splicer - Straight

$3.72

Add to wishlist

3/4" Hose x 3/4" Hose x 3/4" Splicer - Tee

Heater Hose Splicer - Tee

$19.08

Add to wishlist

3/4" Hose x 3/4" Hose x 5/8" Hose Splicer - Tee

Heater Hose Splicer - Tee

$20.25

Add to wishlist

3/4" Hose x 5/8" Hose Splicer - Straight

Heater Hose Splicer - Straight

$8.88

Add to wishlist

3/4" MPT - 1" Hose Slotted Head - Straight

Heater Hose Slotted Head - Straight

$4.52

Add to wishlist

3/8" Drain Elbow

3/8" Drain Hose Elbow

$1.92

Add to wishlist

3/8" Drain Tee

3/8" Drain Hose Tee

$2.20

Add to wishlist

3/8" Drain Tube Per Foot

3/8" Drain Tube

$0.99

Add to wishlist

3/8" Expansion Valve Bulb Clamp

Clamp to secure bulb of expansion valve to evaporator core.

$1.38

Add to wishlist

3/8" MPT X 1/2" Heater Hose Straight

Heater Hose Straight

$5.63

Add to wishlist

3/8" MPT X 3/4" Hose Straight

Heater Hose Straight

$4.00

Add to wishlist

3/8" MPT X 5/8" Heater Hose Straight

Heater Hose Straight

$5.67

Add to wishlist

3/8" MPT x 5/8" Hose 90 Degree

Heater Hose 90 Degree

$9.16

Add to wishlist

3/8" MPT x 5/8" Hose 90 Degree

Heater Hose 90 Degree

$9.07

Add to wishlist

3/8" MPT x 5/8" Hose Straight

Heater Hose Straight

$6.41

Add to wishlist

3/8"-24 Female to M10 x 1.25 Female Switch Port Conversion Fitting

$10.99

Add to wishlist

3/8"-24 Female to M12 x 1.5 Female Conversion Fitting

$9.00

Add to wishlist

3/8"-24 Male to M10-1.25 Male Conversion Fitting

3/8"-24 Male to M10-1.25 Male Conversion Fitting Includes Shrader Valve

$8.99

Add to wishlist

3/8"-24 Male to M11 x 1.5 Female Conversion Fitting

$6.26

Add to wishlist

3/8"-24 Male to M12-1.50 Male Conversion Fitting

3/8"-24 Male to M12-1.50 Male Conversion Fitting Includes Shrader Valve

$5.99

Add to wishlist

3/8"-24 to 13mm R134a Low Side Adapter

3/8"-24 to 13mm R134a Low Side Adapter Will allow you to convert a female 3/8"-24 port to a low side charging port.

$16.52

Add to wishlist

3/8"-24 to 16mm R134a High Side Adapter

3/8"-24 to 16mm R134a High Side Adapter Will allow you to convert a switch port on a drier or an adapter to a high side port.

$13.04

Add to wishlist

4 Inch Round Pro Series Vent

4" Round Pro Series Vent

$23.09

Add to wishlist

4cc Tube A/C Lubricant

$1.00

Add to wishlist

5 Prong Bosch Relay with Wiring Kit for Auxiliary Fans on Condensers

5 Prong Bosch Relay with Wiring Kit for Auxiliary Fans on Condensers This relay kit allows you to install your auxiliary fan on your condenser and wire the relay to...

$18.99

Add to wishlist

5/8" Diameter Tube x 3/4" Hose Straight

Heater Hose Straight

$3.04

Add to wishlist

5/8" Diameter Tube x 5/8" Hose Straight

Heater Hose Straight

$2.44

Add to wishlist

5/8" Heater Hose 50 Feet

5/8" Heater Hose

$90.00

Add to wishlist

5/8" Heater Hose Per Foot

5/8" Heater Hose

$2.15

Add to wishlist

5/8" Hose x 1/2" Hose Splicer - Straight

Heater Hose Splicer - Straight

$3.20

Add to wishlist

5/8" Hose x 3/4" Hose Splicer 90 Degree

Heater Hose 90 Degree Splicer

$9.44

Add to wishlist

5/8" Hose x 5/8" Hose Splicer - Straight

Heater Hose Splicer - Straight

$6.48

Add to wishlist

5/8" Hose x 5/8" Hose x 5/8" Hose Splicer - Tee

Heater Hose Splicer - Tee

$20.25

Add to wishlist

5/8" x 5/8" x 1/2" Hose Splicer - Tee

Heater Hose Splicer - Tee

$8.67

Add to wishlist

7/16" Female Binary Switch

High low pressure switch for a/c systems. The high low pressure switch has a female 7/16" fitting that threads onto the receiver drier. The switch is designed to turn the...

$9.99

Add to wishlist

7/16" Female Flare to M10 Male Switch Port

This adapter will convert a male 7/16" switch port to a M10 switch port.

$12.86

Add to wishlist

7/16" Female Flare to M12 Male Switch Port

This adapter will convert a male 7/16" switch port to a M12 switch port.

$16.00

Add to wishlist

7SB, 7SBU, CVC Compressor Clutch Bearing

AC Compressor Clutch Bearing Fits the following compressor types: Delphi: CVC-165, CVC-185, CVC7P Denso: 10PA15C, 10PA17C, 6CA17C, 6SEU12, 6SEU12C, 6SEU14C, 7SB16C, 7SBU16C, 7SBU17C, 7SEU16 GM/Harrison: HT6 Visteon: VS18M Bearing Specifications:...

$29.99

Add to wishlist

8" Auxiliary Straight Blade Universal Electric Condenser Fan

8" Auxiliary Electric Fan to be mounted on the front of the a/c condenser Pusher Fan Straight Blade 80 Watts

$29.99

Add to wishlist

8MM Tube to #6 Hose Straight Compression Fitting

8MM Tube to # 6 Hose Straight Compression Fitting. These are designed for use with Steel Tubing.

$30.03

Add to wishlist

9" Auxiliary Straight Blade Universal Electric Condenser Fan

9" Auxiliary Electric Fan to be mounted on the front of the a/c condenser Reversible: Pusher or Puller Straight Blade 80 Watts 12V CFM 530

$45.48

Add to wishlist

90 Degree Adapter Tube-O to #10 Male Insert Oring

Adapter 90 Degree Tube-O to Male Insert Oring, #10 Discharge Fitting

$14.75

Add to wishlist

90 Degree Adapter Tube-O to #8 Male Insert Oring

Adapter 90 Degree Tube-O to Male Insert Oring, #8 Discharge Fitting

$14.56

Add to wishlist

90 Degree High Side R-134a Manual Coupler

90 Degree High Side R-134a Manual Coupler 14mm x 1.5mm Hose Connection Replacement coupler for all R-134a manifold gauge sets

$39.46

Add to wishlist

90 Degree High Side R-134a Quick Coupler

90 Degree High Side R-134a Quick Coupler 14mm x 1.5mm Hose Connection Anti-blowback Replacement coupler for all R134a manifold gauge sets

$15.96

Add to wishlist

90 Degree Low Side R-134a Manual Coupler

90 Degree Low Side R-134a Manual Coupler 14mm x 1.5mm Hose Connection Replacement coupler for all R-134a gauge sets

$39.42

Add to wishlist

90 Degree Low Side R-134a Quick Coupler

90 Degree Low Side R-134a Quick Coupler 14mm x 1.5m mm hose connection Anti-blowback Replacement coupler for all R-134a manifold gauge sets

$15.56

Add to wishlist

90 Degree R-134a High Side Retro Fitting Adapter 3/16"

Charging Ports / Valves

$4.99

Add to wishlist

90 Degree R-134a High Side Retro Fitting Adapter 7/16" x 20

Charging Ports / Valves

$4.99

Add to wishlist

90 Degree R-134a Low Side Retro Fitting Adapter 7/16" x 20

Charging Ports / Valves

$7.99

Add to wishlist

97-98 Jeep Wrangler Condenser Outlet Fitting with Orifice Tube

1997-1998 Jeep Wrangler Condenser Outlet Fitting with Orifice Tube This adapter allows you to use the stock condenser in a motor swap and retain the orifice tube in the same...

$45.00

Add to wishlist

A-C and Heater Fitting Square Bulkhead Fitting

Aluminum bulkhead fitting for the firewall that has a #6 and # 10 Male Insert Oring Fittings for the A/C and (2) #10 Male Insert Oring Fittings for the heater...

$55.00

Add to wishlist

A-C and Heater Fitting Straight Bulkhead Fitting

Aluminum bulkhead fitting for the firewall that has a #6 and # 10 Male Insert Oring Fittings for the A/C and (2) #10 Male Insert Oring Fittings for the heater...

$55.00

Add to wishlist

A-C Hose Bulkhead Fitting

Aluminum bulkhead fitting with a #6 and #10 Male Insert Oring Fittings for the suction and liquid line to pass through the firewall.

$38.50

Add to wishlist

A/C & Heat Square Bulkhead - Black Finish

A/C & Heat Square Bulkhead - Black Finish Aluminum bulkhead fitting for the firewall that has a #6 and # 10 Male Insert Oring Fittings for the A/C and (2)...

$69.29

Add to wishlist

A/C Flush Gun Kit

Kit is used to flush an a/c system. Uses a tire valve inflater to pressurize, add solvent and clean the system. Kit includes: Flush canister, hose, nozzle

$55.00

Add to wishlist

A/C Flush, 700ml - Plastic Bottle

A/C Flush (Fast Evaporating Solvent Cleaner Flush) 700ml. Safe for Orings Seals and Hoses Compatible with Mineral Oil, Esters and PAGs Contains no CFCs or HCFCs Will not cause corrosion....

$18.99

Add to wishlist

A/C Flush, Gallon

A/C Flush (Fast Evaporating Solvent Cleaner Flush) 1 Gallon Safe for Orings Seals and Hoses Compatible with Mineral Oil, Esters and PAGs Contains no CFCs or HCFCs Will not cause...

$45.00

Add to wishlist

A/C Flush, Quart

A/C Flush (Fast Evaporating Solvent Cleaner Flush) 1 Quart (.946 Liters) Safe for Orings Seals and Hoses Compatible with Mineral Oil, Esters and PAGs Contains no CFCs or HCFCs Will...

$27.00

Add to wishlist

A/C Hose Crimping Tool for Standard and Reduced Barrier Hose

Bubble style a/c hose crimping tool. Tool includes five sets of dies for standard and reduced barrier hose. Dies snap quickly into place requiring no pins or screws. Unit can...

$499.99

Add to wishlist

A/C Hose Crimping Tool for Standard Barrier Hose

Bubble style a/c hose crimping tool. Tool includes four sets of dies for all four barrier hose sizes. Dies snap quickly into place requiring no pins or screws. Unit can...

$249.99

Add to wishlist

A/C HOSE WELD REPAIR

$115.00

Add to wishlist

A/C Metric Fitting Thread Chasers Set, Includes 8 Sizes

A/C Fittings Thread Chasers Set Metric- 8 Sizes M14-1.5P M16-1.5P M18-1.5P M20-1.5P M22-1.5P M24-1.5P M27-2P M28-1.5P Tee Bar .8mm x 81mm Repairs Inside and Outside Threads

$90.99

Add to wishlist

A/C SAE Fitting Thread Chasers Set, Includes 5 Sizes

A/C Fittings Thread Chasers Set SAE 5 Sizes 5/8" - 18 UNF 3/4" - 16 UNF 7/8" - 14 UNF 1" - 14 UNF 1 1/4" - 14 UNF Tee...

$68.99

Add to wishlist

A6 to Sanden or Seltec Conversion Bracket

A6 to Sanden or Seltec Conversion Bracket Brackets attach to original A6 Mounting Brackets

$92.86

Add to wishlist

Accumulator Drier Jumper Tube

Accumulator Drier Jumper Tube The jumper tube has a #12 (1 1/16"-16) Male Oring for the accumulator side and a #12 (1 1/16"-14) Female Oring for the hose side

$13.70

Add to wishlist

-8%

Aluminum and Steel Hose Repair Kit with 25ft Hose Sections

Aluminum and Steel Hose Repair Kit. It includes weld on aluminum and steel barbs with ferrules to repair factory a/c hoses. The kit includes the following: 25ft #6 5/16" Hose...

~~$849.46~~ $779.99

Add to wishlist

-9%

Aluminum and Steel Hose Repair Kit with 50ft Hose Sections

Aluminum and Steel Hose Repair Kit. It includes weld on aluminum and steel barbs with ferrules to repair factory a/c hoses. The kit includes the following: 50ft #6 5/16" Hose...

~~$1,292.45~~ $1,179.99

Add to wishlist

Aluminum Manifold Set

R134a Refrigerant Manifold Gauge Set (Aluminum) 72" Hose Set Manual Couplers Anti-Blowback on Service Line Protective Rubber Gauge Covers

$103.90

Add to wishlist

Aluminum Tube 1/2" OD x .049" W x 5FT Long

Aluminum Tube 1/2" OD x .049" W 5FT Long Section

$40.00

Add to wishlist

Aluminum Tube 3/8" OD x .049" W x 5FT Long

Aluminum Tube 3/8"" OD x .049" W 5FT Long Section

$50.00

Add to wishlist

Aluminum Tube 5/8" OD x .049" W x 5FT Long

Aluminum Tube 5/8" OD x .049" W 5FT Long Section

$50.00

Add to wishlist

Aotecar E34300A-0065H Electric Compressor Suction and Discharge Block Fitting Set for Oring Compressors

Aotecar E34300A-0065H Electric Compressor Suction and Discharge Block Fitting Set for Oring Compressors The discharge block has a #8 (3/4"-16 thread) male insert oring fitting The suction block has a...

$65.00

Add to wishlist

Black GM 5/8" Thick Sealing Washer

Black GM 5/8" Thick Sealing Washer Qty. 1 Each Color: Black Compressor Type: GM Part Type: Sealing Washer Rubber ID: 15.24mm Steel OD: 29.51mm

$1.00

Add to wishlist

Block Expansion Valve

Block Expansion Valve Suction Inlet Thread Size: 3/4"-18 (#8) Suction Outlet Thread Size: 7/8"-18 (#10) Liquid Inlet Thread Size: 5/8"-18 (#6) Liquid Outlet Thread Size: 3/4"-18 (#8) Tonnage 1.5 Refrigerant R134a...

$24.99

Add to wishlist

Block Expansion Valve, 2 Tons

Block Expansion Valve Suction Inlet Thread Size: 7/8"-18 (#10) Suction Outlet Thread Size: 7/8"-18 (#10) Liquid Inlet Thread Size: 5/8"-18 (#6) Liquid Outlet Thread Size: 3/4"-18 (#8) Tonnage: 2 Refrigerant...

$24.99

Add to wishlist

Blower Motor Switch with Long Shaft

Blower Motor Switch with Long Shaft Rotary Style Switch, 3 Speed, 4 Position 12/24 Volt, 20 Amp

$22.49

Add to wishlist

Brass Manifold Set

R134a Refrigerant Manifold Gauge Set (Brass) 72" Hose Set Automatic Quick Couplers Anti-Blowback on Service Line Protective Rubber Gauge Covers

$115.00

Add to wishlist

Buick Chevy GMC Accumulator Drier with Standard Threads

Accumulator Drier with standard threads Fits many applications including: Buick, Chevy and GMC Diameter: 3.50" Height: 9" Inlet Size: #12 (1 1/16"-14) Outlet Size: #12 (1 1/16"-14) 1/4" Male R12...

$31.75

Add to wishlist

Build A Custom AC Hose

The custom a/c hose build page is to allow customers to purchase barrier hose by the inch with two fittings. The page will give us the information necessary to ship...

$40.00

Add to wishlist

Build A Custom Hose

The custom a/c hose build page is to allow customers to purchase barrier hose by the inch with two fittings. The page will give us the information necessary to ship...

$0.00

Add to wishlist

BurgaClip Pliers

Crimping tool for BurgaClip Fittings All sizes: #6-#14 Reduced Barrier Hose Compatible with AirSource MEI Part Number 8758BC

$258.39

Add to wishlist

-6%

Bus AC Inline Receiver Drier

Bus AC Inline Receiver Drier Compatible with the following OEM part numbers: WSG164FO, WSG-164FO, DR001A Drier Specifications: Diameter: 2.5" Length: 6.5" Fitting Inlet/Outlet: #8 Male Flare

~~$45.00~~ $42.38

Add to wishlist

Cadillac Chrysler 10S17 10SRE18C 10SRE20C Compressor Suction and Discharge Block Fitting Set for Oring Compressors

5.7L Chrysler Hemi Compressor Block. Fits 10S17 Compressors and 10SRE18C and 10SRE20C Compressors from 2011-2014 Jeep and Dodge The discharge block has a #8 (3/4"-16 thread) male insert oring fitting...

$65.00

Add to wishlist

-1%

Carrier AC Accumulator Drier

Carrier AC Accumulator Drier, Generic Brand Compatible with Carrier part number: 65-62004-00, 10430 Drier Specifications: Diameter: 3.94" Length: 9.84" Fitting Inlet/Outlet: #12 Male Insert oring

~~$74.29~~ $73.25

Add to wishlist

Case IH International Navistar AC Receiver Drier

Case IH International Navistar AC Receiver Drier Compatible with part numbers: 118304C1, 118418C1, 08802300, 544983C1 Drier Specifications: Diameter: 4" Height: 6.75" Fitting Inlet/Outlet: #6 Male Insert Oring

$50.80

Add to wishlist

Caterpillar 176-3900 Generic Accumulator Drier

Aftermarket Accumulator Drier. Has #12 (1 1/16"-16) Female Oring Inlet and Outlet Fittings. The accumulator is 3.50" in diameter and 9.75" tall OEM compatible part numbers: 186-6190, 176-3900, 152-2823, 416-5513, F124088

$50.30

Add to wishlist

-7%

Caterpillar AC Inline Drier with Orifice Tube

Caterpillar AC Inline Drier with Orifice Tube, Generic Brand Compatible with the following part numbers: 257-3227, 257-3226, 07-5056A Drier Specifications: Diameter: 2.50" Length: 11" Fitting Inlet: #6 Male Insert Oring Fitting Outlet:...

~~$57.14~~ $52.99

Add to wishlist

Chevrolet P30 and GMC P3500 AC Receiver Drier

Chevrolet P30 (1997-1999) GMC P3500 (1997-1999) AC Receiver Drier Compatible with part numbers: 088370, 08837000, 330382A, 12375379, 7514 Drier Specifications: Drier Diameter: 2.50" Drier Height: 6.25" Fitting Inlet: 18mm Fitting Outlet: Quick Disconnect Fitting (QD)...

$24.00

Add to wishlist

Compressor to Condenser Discharge Hose - Kenworth Applications

Compressor to Condenser Discharge Hose - Kenworth Applications Compatible with the following OEM part numbers: D9031-1549, D9031-1541, F50-1089-1125

$90.00

Add to wishlist

Core Tie Strap and Clip Mount Kit

Core Tie Strap and Clip Mount Kit Used for adding universal auxiliary condenser fans

$11.99

Add to wishlist

CUSTFIT

$45.00

Add to wishlist

CUSTFIT #10

CUSTOM MADE FITTING

$45.00

Add to wishlist

CUSTFIT #6

$45.00

Add to wishlist

CUSTFIT #8

CUSTOM MADE FITTING

$45.00

Add to wishlist

Custom Fitting Made with Customer's Manifold Fittings

The customer shipped us his original compressor manifold fittings and we welded male insert oring fittings onto his blocks. Now he is able to connects his fittings and use a...

$95.00

Add to wishlist

CUSTOM WELD

$57.50

Add to wishlist

-46%

Daf XF 95 Truck AC Receiver Drier

Daf XF 95 Truck AC Receiver Drier Compatible with the following OEM part number: 1290592 Drier Specifications: Diameter: 2.05" Length: 5" Fitting Inlet/Outlet: #6 Male Flare

~~$37.14~~ $19.99

Add to wishlist

Denso 10PA 10S Coil 12 Volt

Denso 10PA 10S Coil 12 Volt Generic Brand Coil OD 96.4mm Coil ID 61.6mm Mounting ID 40mm Thickness 27.66mm 2 Wire

$44.57

Add to wishlist

Denso 10PA, TV Compressor Clutch Bearing

AC Compressor Clutch Bearing Fits the following compressors: Denso: 10PA15 Series, 10PA17 Series, 10PA20C, 10PA20H, 10PA20J, 10PA20SC, 10PA20SH, 10PA20VC, 10S13C, 10S13P, 10S15C, 10S15L, 10S17C, 10S20C, 10S20F, 10S20H, 10SR15C, 10SR17C, TV10...

$29.99

Add to wishlist

Denso 10S17F 10S20F 10SE18F Suction and Discharge Compressor Adapters for Sealing Washer Compressor

GM Nippondenso (Denso) 10S17F & 10S20F & 10SE18F (Sealing Washer) compressor adapters used to convert a stock compressor to aftermarket hoses. The adapters are standard #8 discharge and #10 suction fittings....

$69.50

Add to wishlist

DKS, SD, Mat Compressor Clutch Bearing

AC Compressor Clutch Bearing Fits the following compressor types: Calsonic: CR14, CSV613, CWV615, CWV617, CWV618, DKV14D Diesel Kiki: DCV11A, DCV14A, DCV14J, DCW17B, DCW17D, DKS13CH, DKS13G (DUAL), DKS13G (SINGLE), DKS13S, DKS15BH,...

$29.99

Add to wishlist

DKV14C, 10P, SD5 Compressor Clutch Bearing

AC Compressor Clutch Bearing Fits the following compressor types: Calsonic: CWV615, CWV617, CWV618 Denso: 10P13 Series, 10P15 Series, 10P17 Series Hitachi: MJS170 Mitsubishi: MSC105CVS, MSC90, MSC90C Nihon: DKV14C Sanden: SD507,...

$29.99

Add to wishlist

-55%

Dodge Generic Receiver Drier

Aftermarket Receiver Drier. Has a #6, 3/8" Male Insert Oring and a #6 Female Insert Oring. The drier is 2.50in in diameter and 6.00in long. OEM compatible part numbers: 3503829,...

~~$45.00~~ $20.42

Add to wishlist

Dodge Receiver Drier with #6 Male Flare Fittings

Dodge Aftermarket Receiver Drier 2.5" Diameter 7.5" Height Fitting Inlet/Outlet - #6 3/8" Male Flare Top Sight Glass Male Switch Port, 1 7/16" Flare OEM compatible part numbers: 1510857, 4271128, 33233,...

$22.50

Add to wishlist

Domestic and Import Orifice Tube Remover/Installer

Domestic and Import Orifice Tube Remover/Installer Removes stuck orifice tubes Compatible with part numbers 8930, 15-3010, 79R1660

$37.50

Add to wishlist

Drier and Condenser Pad Mount Adapter with .400 Pilot

Adapts pad mount drier and condenser to #6 Male Insert Oring. Has a .400" pilot.

$24.35

Add to wishlist

Ester Oil, 8 ounce Bottle

FJC Ester Oil For use with : R12 & R134a Refrigerants Compatible with: Ester, Mineral, and Parrafin Oils 8 ounce bottle

$11.20

Add to wishlist

EZ Clip Assortment Kit

EZ Clip Assortment Kit Includes Clips, Cages, Orings, Assembly Tool and Hose Cutter

$399.18

Add to wishlist

EZ Clip Pliers

EZ Clip Pliers For #4, #6, #8, #10 and #12 Clips

$149.25

Add to wishlist

EZ Clip Universal Hose Kit

EZ Clip Universal Hose Kit The EZ Clip refrigerant hose is easy to assemble without needing a crimper. You will need the EZ Clip Pliers to install the fittings to...

$449.00

Add to wishlist

-36%

Farm and Offroad AC Receiver Drier

Farm and Offroad AC Receiver Drier Compatible with the following OEM part numbers: 3500-1, 24803401, 24803401 Drier Specifications: Diameter: 4" Height: 6" Fitting Inlet/Outlet: #6 Male Flare Fuse Plug

~~$67.14~~ $42.75

Add to wishlist

Female 10mm Trinary Switch

This is a female trinary switch that has M10-1.25 threads. This switch can be installed on a drier or on a switch port within the high side of the system....

$19.99

Add to wishlist

Female 3/8"-24 Aluminum Weld on Switch Port

Female 3/8"-24 Aluminum Weld on Switch Port Pilot ID 1/8" Pilot OD 1/4" Overall Length 0.815"

$8.99

Add to wishlist

Female 7/16"-20 Trinary Switch

This is a female trinary switch that has 7/16"-20 threads. This switch can be installed on a drier or a switch port on a fitting within the system. The trinary...

$16.99

Add to wishlist

Fin Comb

Condenser and Evaporator Fin Comb

$13.99

Add to wishlist

Fire Truck TM31 Style Compressor with 8 Groove Clutch

Fire Truck TM31 Style Compressor TM31/CP31 Compressor Type 8 Groove Clutch 152mm Diameter of Pulley 12 Volt Coil Cross References: 488-46540, 18-60012-11, 17-31248-00, 68702

$945.00

Add to wishlist

Flare Expansion Valve

Flare Expansion Valve Inlet # 6 (5/8"-18) Outlet #8 (3/4"-16) Capillary Length 12"

$24.99

Add to wishlist

Flare Expansion Valve with Oil Line

Flare Expansion Valve Inlet # 6 (5/8"-18) Outlet #8 (3/4"-16) 1/4" Female Flare Equalizer Capillary Length 18"

$36.86

Add to wishlist

Foaming Condenser Cleaner 18oz

Foaming Condenser Cleaner 18oz Powerful foaming action penetrates deep between the condenser fins for superior cleaning. Enhances airflow for maximum cooling performance and extends system life.

$19.99

Add to wishlist

Foaming Evaporator Cleaner with Odor Control, 16oz

Foaming Evaporator Cleaner with Odor Control, 16oz Powerful foaming actions fills evaporator case to ensure complete surface cleaning. kills odor causing contaminants. Restores fresh, neutral scent. Fast acting, no rinse...

$19.99

Add to wishlist

Ford Accumulator Drier with Threaded Fittings

Accumulator Drier, Ford Applications Inlet Fitting: #10 Male Insert Oring Outlet Fitting: #12 Male Insert Oring Diameter: 3.50" Length: 8" Compatible with OEM part numbers: F4TZ-19C836-A, YF-2386, YF-1335, F6HH-19C808-BA. F6HZ-19C836-BA, F6TH-19C808-AA, F6TZ-19C836-AA, 33091

$44.99

Add to wishlist

Ford Blue Orifice Tube

Ford Blue Orifice Tube Orifice Size .057"

$2.29

Add to wishlist

Ford Brown Orifice Tube

Ford Brown Orifice Tube Orifice Size .047"

$2.29

Add to wishlist

Ford Clutch Cycling Switch Pigtail

$12.99

Add to wishlist

Ford Clutch Cycling Switch Pigtail

Ford Clutch Cycling Switch Pigtail The pigtail includes an instruction sheet. It fits many different switches that have 1,2,3 or 4 pins/wires. If you have a two wire switch, the...

$9.99

Add to wishlist

Ford Female Clutch Cycling Switch M12 x 1.5

Ford Female Clutch Cycling Switch M12 x 1.5 Normally Open Closed: 38psi Open: 22psi

$19.99

Add to wishlist

Ford Female Clutch Cycling Switch M12 x 1.50

GM Female Clutch Cycling Switch M12 x 1.50 Normally Open Closed: 44psi Open: 24psi

$9.99

Add to wishlist

Ford FS10 90 Degree Oring Compressor Block

Ford compressor hose adapter. This adapter will allow you to use a Ford FS-10 a/c compressor with an aftermarket a/c system or aftermarket hose kit. The adapter is designed to...

$85.00

Add to wishlist

Ford FS10 Compressor Block

Ford compressor hose adapter. This adapter will allow you to use a Ford FS-10 a/c compressor with an aftermarket a/c system or aftermarket hose kit. The adapter is designed to...

$45.00

Add to wishlist

Ford FS10 Short Drop 90 Degree Compressor Block

Ford compressor manifold hose adapter. This adapter will allow you to use a Ford FS-10 a/c compressor with an aftermarket a/c system or aftermarket hose kit. The adapter is designed...

$55.00

Add to wishlist

Ford FS10 Short Drop 90 Degree Compressor Block with Pressure Relief Valve

Ford compressor hose adapter. This adapter will allow you to use a Ford FS-10 a/c compressor with an aftermarket a/c system or aftermarket hose kit. The adapter is designed to...

$75.00

Add to wishlist

Ford Red Orifice Tube

Ford Red Orifice Tube Orifice Size .062"

$2.29

Add to wishlist

Ford, GM, Volvo 7/16"-20 Female Clutch Cycling Switch

Female Clutch Cycling Switch Specifications: Normally Open 7/16"-20 Thread Closed 44psi Open 24 psi

$10.99

Add to wishlist

Freightliner Receiver Drier with #6 Male and Female Oring Fittings

Aftermarket Receiver Drier Freightliner applications 3" Diameter 8 1/4" Height Fitting Inlet - #6, 3/8" Male Oring Fitting Outlet- #6, 3/8" Female Oring (2) 7/16" Flare Male Switch Ports Pressure Relief...

$22.50

Add to wishlist

Freightliner Truck AC Receiver Drier

Freightliner Truck AC Receiver Drier, Generic Brand Compatible with OEM Numbers: 2237199001, ABPN83319254, ABP-N83-319254, 11092, 3949128 Drier Specifications: Diameter: 3" Height: 8.25" Fitting Inlet: #6 Male Insert Oring Fitting Outlet: #6 Female Oring Switch Ports:...

$46.28

Add to wishlist

FS10 Short Drop 45 Degree

FS10 Short Drop Angled 45 Degree Popular for Coyote Swaps

$85.00

Add to wishlist

Fujikoki Oring Expansion Valve

Oring Expansion Valve Inlet # 6 (5/8"-18) Outlet #8 (3/4"-16) Capillary Length 8"

$36.55

Add to wishlist

FX15, FX10, NVR Compressor Clutch Bearing

AC Compressor Clutch Bearing Fits the following Compressor types: Behr: Wingcell Bosch: Axial Diesel Kiki: DKS16H (R12), DKS16H (R134A) Ford: FS10, FS18, FX15 Nihon: DKV14B, NVR140S Visteon: HS15, HS17, HS18...

$29.99

Add to wishlist

Generic Receiver Drier #6 Male O-Ring with 7/16" and 10mm Switch Ports

Universal Generic Receiver Drier. Has #6 3/8" Male O-ring Inlet and Outlet fittings. The diameter of the drier is approximately 2.5" and the height is 8". This drier has a...

$41.00

Add to wishlist

Genuine Alma A6 Compressor OEM #1131197

Genuine A6 Compressor Manufactured by Alma Products Manufacturer #: 51-86008A OEM Part NumApplication: GMC/Off Road/Bus ApplicationsVolts: 12VClutch Diameter: 5''No. of Grooves: 1 grooveBelt Type: 1/2'' BeltNo. Comp. Cylinders: 6 cylComp....

$560.00

Add to wishlist

GM - Ford JRA Import Valve Core

Charging Ports / Valves

$2.99

Add to wishlist

GM 1978-1993 Hose Kit for a Motor Swap

GM 1978-1993 Hose Kit for a Motor Swap This is a complete hose kit to make all three a/c lines on a 1978-1993 Chevy/GM Truck or Car. This is a...

$67.25

Add to wishlist

GM 1994-2002 Hose Kit for a Motor Swap

GM 1994-2002 Hose Kit for a Motor Swap This is a complete hose kit to make all three a/c lines on a 1994-2002 Chevy/GM Truck or Car. This is a customizable product...

$67.25

Add to wishlist

GM 2 Pin Oval Pressure Switch Pigtail

Wire Harness - GM 2 Pin Oval Pressure Switch Pigtail

$21.90

Add to wishlist

GM 5.3L 6.0L Compressor Discharge and Suction Block Fittings

GM 5.3L 6.0L discharge and suction block fittings. Accepts a #8 (3/4" -16) and a # 10 (7/8" -14) Female Oring Fitting. Only fits 10S17F, 10S20F and 10SE18F Sealing Washer...

$55.00

Add to wishlist

GM A6, H6, R4, V5, V7 Compressor Clutch Bearing

AC Compressor Clutch Bearing Fits the following compressor types: Calsonic: V5-15C, V5-15F, V5-15G Daewoo: V5 GM/ Harrison: A6, DA6, HD6, HR6, HR6HE, HT6, HU6, R4, V5, V7 Keihin: 150L, 150R...

$25.68

Add to wishlist

GM Accumulator Tank and Tube Kit, Standard Threads

GM Accumulator Tank and Tube Kit Inlet Fitting: #12 (3/4") Female Insert (Accepts #12 Male Oring Fitting On Evaporator) Outlet Fitting: #12 (3/4") Female Insert that accepts the Male Oring...

$59.00

Add to wishlist

GM Accumulator with Metric Threads

GM Accumulator Fitting Inlet 27MM Female Oring Fitting Outlet 27MM Male Insert Oring (1) M12-1.5 Male Switch Port

$24.99

Add to wishlist

GM Accumulator with Metric Threads in Opposite Directions

GM Accumulator Fitting Inlet 27MM Female Oring Fitting Outlet 27MM Male Insert Oring (1) M12-1.5 Male Switch Port

$22.99

Add to wishlist

GM Black Orifice Tube

GM Black Orifice Tube Orifice Size .072"

$2.29

Add to wishlist

GM Compressor Double Swivel 180 Degree

GM Compressor Double Swivel 180 Degree The hose crimps are for #8 (13/32") and #12 (5/8") Hose. Equivalent to Four Seasons 12019 part number

$65.00

Add to wishlist

GM Compressor Double Swivel 90 Degree

GM Compressor Double Swivel 90 Degree The hose crimps are for #8 (13/32") and #12 (5/8") Hose. Equivalent to Four Seasons 12034 part number

$65.00

Add to wishlist

GM Compressor Horizontal Block Fitting with #8 and #10 Oring Fittings

Block fitting with 8 and 10 Male insert Oring fittings *Note: Trim discharge / suction nipple on the adapter block if needed; ensure shavings/debris removed prior to install.

$25.00

Add to wishlist

GM Compressor Oring

GM Compressor Applications (R4, A6) and Sandens with a GV Rear Head D (mm): 20.22 ID Tolerance (mm): 0.25 Thickness (mm): 3.53 Thickness Tolerance (mm): 0.1 Material: HNBR Color: Green

$0.50

Add to wishlist

GM Compressor Single Pad Block Discharge and Suction Fittings

Single Pad Block with Oring Discharge and Suction Fittings

$25.00

Add to wishlist

GM Compressor Single Pad Block Discharge Fitting

Single Pad Block with Oring Discharge Fitting

$15.77

Add to wishlist

GM Compressor Single Pad Block Suction Fitting

Single Pad Block with Oring Suction Fitting

$15.00

Add to wishlist

GM Compressor Vertical Block Fitting with #8 and #10 Oring Fittings

Block fitting with #8 and #10 Male insert Oring fittings.

$65.00

Add to wishlist

GM Dodge Variable Orifice Tube

$5.65

Add to wishlist

GM Female High Pressure Switch 10mm x 1.25

GM Female High Pressure Switch M10 x 1.25 Open: 255psi Closed: 340ps Normally Open Switch

$22.42

Add to wishlist

GM Gray Variable Orifice Tube

GM Gray Variable Orifice Tube Orifice Size .072"

$4.99

Add to wishlist

GM Green Sealing Washer

GM Green Sealing Washer Color: Green Compressor Type: GM Part Type: Sealing Washer Rubber ID: 15.49mm Steel OD: 29.59mm Rubber Thickness: 7.32mm Steel Thickness: 5.44mm

$1.80

Add to wishlist

GM High Pressure Cut Off Switch

Popular GM switch used in the back of the a/c compressor Blue Switch, Open: 200psi Closes: 430psi Example of compressors that the switch fits: Denso 10S17F 10S20F HT6, R4 and...

$13.86

Add to wishlist

GM High Pressure Switch Connector

Wire Harness - GM High Pressure Switch Connector

$8.50

Add to wishlist

GM High Side High Flow Line M-15-1.0 Male - M10-1.25 Female

Charging Ports / Valves

$7.99

Add to wishlist

GM Large Bore Valve Core

Charging Ports / Valves

$2.99

Add to wishlist

GM Low Side High Flow Line M13-1.0 Male - Cap M8-1.0 Female

Charging Ports / Valves

$4.99

Add to wishlist

GM LS1 LS2 Style Horizontal Offset Raised Face Compressor Block

GM LS1 LS2 Style Horizontal Compressor Block. #8 Discharge and #10 Suction Oring Fittings. The discharge port has a raised face.

$48.50

Add to wishlist

GM LS1 LS2 Style Vertical Raised Face Compressor Block

GM LS1 LS2 Style Vertical Raised Face Compressor Block. #8 Discharge and #10 Suction Oring Fittings. The discharge port has a raised face.

$48.50

Add to wishlist

GM LS1 Style Vertical Raised Face Reversed Compressor Block

GM LS1 Style Vertical Raised Face Reversed Compressor Block. This block is the same as P/N AA0443 but the fittings are reversed. #8 Discharge and #10 Suction Oring Fittings. The...

$48.50

Add to wishlist

GM LT Corvette LS3 CVC Horizontal Compressor Block

This adapter will allow you to use the stock compressor on a LT Crate engine, LS-3 engine with an aftermarket air conditioning system. The adapter is designed to fit on...

$75.00

Add to wishlist

GM LT Corvette LS3 CVC Vertical Compressor Block

This adapter will allow you to use the stock compressor on a LT Crate engine, LS-3 engine with an aftermarket air conditioning system. The adapter is designed to fit onto...

$55.00

Add to wishlist

GM Metric Male Insert Oring M20 by # 6 Male Insert Oring by Female Oring M20

GM Metric Oring Tee. Male Insert Oring M20 X 1.5 by # 6 Male Insert Oring (5/8" -18) by Female Oring M20 X1.5

$21.90

Add to wishlist

GM Metric Male Insert Oring M27 by # 10 Male Insert Oring by Female Oring M27

GM Metric Oring Tee. Male Insert Oring M27 X 2.0 by # 10 Male Insert Oring (7/8"-14) by Female Oring M27 X 2.0

$17.98

Add to wishlist

GM Orifice Tube Repair

GM Orifice Tube Repair with White Orifice This repair kit includes compression fittings nuts. For the best connection you can just use threaded crimp on fittings to go to either...

$19.99

Add to wishlist

GM R4 Compressor Gasket Kit

GM R4 Compressor Gasket Kit R12/R134a

$7.99

Add to wishlist

GM Red Sealing Washer

GM Red Sealing Washer Color: Red Compressor Type: GM Part Type: Sealing Washer Rubber ID: 15.49mm Steel OD: 29.59mm Rubber Thickness: 5.00mm Steel Thickness: 3.68mm

$1.80

Add to wishlist

GM Sanden SD7 Compressor Discharge Fitting

Discharge Fitting

$30.00

Add to wishlist

GM Sanden SD7 Compressor Discharge and Suction Fitting Set

Discharge and Suction Fittings

$55.00

Add to wishlist

GM Sanden SD7 Compressor Suction Fitting

Suction Fitting

$30.00

Add to wishlist

GM Sanden SD7 SD7B10 Compressor Discharge and Suction Manifold

Peanut Style Discharge and Suction Block Fittings Fits: SD7B10 7176

$55.00

Add to wishlist

GM Sealing Washer Assortment Kit

This kit includes basic sealing washers for various GM compressor set ups.

$5.00

Add to wishlist

GM Silver 3/4" Thin Sealing Washer

GM Silver 3/4" Thin Sealing Washer Color: Silver Compressor Type: Chrysler and GM Type: Sealing Washer Rubber ID: 17.27mm Steel OD: 31.57mm

$0.95

Add to wishlist

GM Silver 5/8" Thin Sealing Washer

GM Silver 5/8" Thin Sealing Washer Color: Silver Compressor Type: GM Type: Sealing Washer Rubber ID: 15.24mm Steel OD: 27.99mm

$0.89

Add to wishlist

GM White Orifice Tube

GM White Orifice Tube Orifice Size .072"

$2.29

Add to wishlist

GM Yellow Orifice Tube

GM Yellow Orifice Tube Orifice Size .062"

$2.29

Add to wishlist

GM, Keihin Compressor Clutch Bearing

AC Compressor Clutch Bearing, Aftermarket Fits the following compressor types: Calsonic: V5-15C, V5-15F, V5-15G Daewoo: V5 GM/ Harrison: A6, DA6, HD6, HR6, HR6HE, HT6, HU6, R4, V5, V7 Keihin: 150L,...

$29.99

Add to wishlist

-45%

GOLD # 10 90 Degree O-ring Fitting

Male Oring 90 Degree **NO RETURNS ON CLEARANCE FITTINGS**

~~$9.15~~ $5.00

Add to wishlist

-51%

GOLD # 10 Straight O-ring Fitting

Male Oring Straight **NO RETURNS ON CLEARANCE FITTINGS**

~~$8.20~~ $4.00

Add to wishlist

-50%

GOLD # 10 Straight O-ring Fitting

GOLD Male Oring Straight **NO RETURNS ON CLEARANCE FITTINGS**

~~$10.06~~ $5.03

Add to wishlist

-55%

GOLD # 12 45 Degree O-ring Fitting Barb

Female Oring 45 Degree **NO RETURNS ON CLEARANCE FITTINGS**

~~$8.81~~ $4.00

Add to wishlist

-54%

GOLD # 6 90 Degree O-ring Fitting

Female Oring 90 Degree **NO RETURNS ON CLEARANCE FITTINGS**

~~$8.67~~ $4.00

Add to wishlist

-53%

GOLD # 6 Straight O-ring Fitting

Female Oring Straight **NO RETURNS ON CLEARANCE FITTINGS**

~~$6.44~~ $3.00

Add to wishlist

-54%

GOLD # 8 90 Degree O-ring Fitting

Female Oring 90 Degree **NO RETURNS ON CLEARANCE FITTINGS**

~~$8.79~~ $4.00

Add to wishlist

-54%

GOLD # 8 Straight O-ring Fitting

Female Oring Straight **NO RETURNS ON CLEARANCE FITTINGS**

~~$6.57~~ $3.00

Add to wishlist

-50%

GOLD # 8 Weld On Barb (outer) Steel

GOLD Barb. 1/2" OD Tube to #8 Hose ** NO RETURNS ON CLEARANCE FITTINGS **

~~$5.04~~ $2.52

Add to wishlist

Grommet Dual Hose # 6 and # 10

Grommet is used for #6 and #10 air conditioning hose to route through the firewall in the same grommet. The grommet has three holes for screws to secure it to...

$2.20

Add to wishlist

Hand Held Hydraulic A/C Hose Crimping Tool For Standard and Reduced Barrier Hose

Bubble style a/c hose crimping tool. Tool includes five sets of dies for standard and reduced barrier hose. Dies snap quickly into place requiring no pins or screws. This is...

$429.99

Add to wishlist

Heater Control Valve

Cable operated heater control valve to control the water flow into the heater. If your a/c system is allowing hot water into the heater core while the a/c is on...

$24.99

Add to wishlist

Heater Control Valve Cable

Heater Control Valve Cable You can use this cable to operate the heater control valve and mount it on your dash or under your dash. Overall Length: 28.375"

$23.50

Add to wishlist

High Pressure Cut off Switch, Ford Applications

HPCO Switch M10 - 1.25 F Normally Closed Closed: 290 PSI Open: 435PSI OEM Compatible Part Numbers: F5TZ-19D594-AA, 6L3Z-19D594-A, 1550751, 1551168, 20057, 20916, YH1705

$16.00

Add to wishlist