Welcome

Switches and Adapters

Items 1 to 25 of 29 total

per page
Page:
  1. 1
  2. 2

Set Ascending Direction
  1. Universal Rotary Blower Switch Pigtail

    Universal Rotary Blower Switch Pigtail

    $13.99

    Universal Rotary Blower Switch Pigtail, 5 Terminal 6" Connector Length, 14" Gauge Wire Learn More
  2. Universal Binary Switch Pigtail

    Universal Binary Switch Pigtail

    $2.50

    Universal 2 Blade Binary Switch Pigtail Learn More
  3. Rotary Thermostat with 18" Capillary Probe

    Rotary Thermostat with 18" Capillary Probe

    $39.99

    Rotary Thermostat with 18" Capillary Probe This thermostat is common on aftermarket a/c systems Learn More
  4. Rotary 3 Speed Blower Fan Switch

    Rotary 3 Speed Blower Fan Switch

    $9.99

    Five wire rotary blower fan switch. This switch is very common on aftermarket a/c systems. This is a three speed, four position switch. The switch is designed to run the blower motor at low, medium and high speeds as well as turn on the compressor (running through thermostat). Learn More
  5. Replacement Rotary Control Knobs

    Replacement Rotary Control Knobs

    $8.99

    Replacement Control Knobs This is a set of replacement rotary knobs. One knob for the blower switch and one for the thermostat Learn More
  6. Receiver Drier Switch Conversion Fitting 7/16" Female to 3/8" Male

    Receiver Drier Switch Conversion Fitting 7/16" Female to 3/8" Male

    $3.75

    A/C Switch Conversion Fitting Converts 7/16"-20 Female Flare to 3/8"-24 Male (with valve core) Learn More
  7. Receiver Drier Switch Conversion Fitting 3/8"-24 Male to 10mm Male Thread

    Receiver Drier Switch Conversion Fitting 3/8"-24 Male to 10mm Male Thread

    $10.02

    A/C Switch Conversion Fitting Converts 3/8"-24 Female to 10mm Male Thread Learn More
  8. R134a Retrofit Switch Kit - 3/16" (3/8") R12 Port

    R134a Retrofit Switch Kit - 3/16" (3/8") R12 Port

    $15.99

    R134a Retrofit Switch Kit This adapter will screw over a 3/16" (3/8") R12 port and convert it to R134a and at the same time add a binary switch (High and Low Pressure Cut off Switch) Learn More
  9. R134a Retrofit Switch Kit - 1/4" (7/16") R12 Port

    R134a Retrofit Switch Kit - 1/4" (7/16") R12 Port

    $15.99

    R134a Retrofit Switch Kit This adapter will screw over a 1/4" (7/16") R12 port and convert it to R134a and at the same time add a binary switch (High and Low Pressure Cut off Switch) Learn More
  10. Oring Compressor #8 90 Female Oring Fitting with High Side Port, Binary Switch and Pigtail

    Oring Compressor #8 90 Female Oring Fitting with High Side Port, Binary Switch and Pigtail

    $35.00

    This is a # 8 90 Degree Female Oring Fitting with high side port. It will screw onto a Sanden oring compressor discharge fitting. It includes a switch port with a binary switch and pigtail. Learn More
  11. Fitting

    Oring Compressor #8 90 Female Oring Fitting with High Side Port

    $25.00

    This is a # 8 90 Degree Female Oring Fitting with high side port. It will screw onto a Sanden oring compressor discharge fitting. It includes a 10mm switch port that accepts a binary switch. Learn More
  12. Male Binary Switch 3/8" - 24

    Male Binary Switch 3/8" - 24

    $9.99

    High low pressure switch for a/c systems. The high low pressure switch has a male fitting 3/8"-24 that threads into the receiver drier. The switch is designed to turn the system off if the head pressure gets to low or high. This will protect the compressor from being damaged if any problems occur in the system. Learn More
  13. M10 Female to 7/16" R12 Male Flare Conversion Fitting

    M10 Female to 7/16" R12 Male Flare Conversion Fitting

    $15.71

    This adapter will convert a male M10 switch port to a 7/16" switch port Learn More
  14. GM High Pressure Switch Connector

    GM High Pressure Switch Connector

    $6.99

    Wire Harness - GM High Pressure Switch Connector Learn More
  15. GM High Pressure Cut Off Switch

    GM High Pressure Cut Off Switch

    $9.99

    Popular GM switch used in the back of the a/c compressor Blue Switch, Open: 200psi Closes: 430psi Example of compressors that the switch fits: Denso 10S17F 10S20F HT6, R4 and V5 Learn More
  16. GM Female High Pressure Switch 10mm x 1.25

    GM Female High Pressure Switch 10mm x 1.25

    $18.99

    GM Female High Pressure Switch M10 x 1.25 Open: 340psi Close: 255 psi Learn More
  17. GM 2 Pin Oval Pressure Switch Pigtail

    GM 2 Pin Oval Pressure Switch Pigtail

    $16.99

    Wire Harness - GM 2 Pin Oval Pressure Switch Pigtail Learn More
  18. Ford Female Clutch Cycling Switch M12 x 1.50

    Ford Female Clutch Cycling Switch M12 x 1.50

    $9.99

    GM Female Clutch Cycling Switch M12 x 1.50 Normally Open Closed: 44psi Open: 24psi Learn More
  19. Ford Female Clutch Cycling Switch M12 x 1.5

    Ford Female Clutch Cycling Switch M12 x 1.5

    $19.99

    Ford Female Clutch Cycling Switch M12 x 1.5 Normally Open Closed: 38psi Open: 22psi Learn More
  20. Ford Clutch Cycling Switch Pigtail

    Ford Clutch Cycling Switch Pigtail

    $12.99

    Ford Clutch Cycling Switch Pigtail Learn More
  21. Female 7/16"-20 Trinary Switch

    Female 7/16"-20 Trinary Switch

    $15.99

    This is a female trinary switch that has 7/16"-20 threads. This switch can be installed on a drier or a switch port on a fitting within the system. The trinary performs the same functions as a high/low binary switch and operates the electric fan. Fan on at 242 PSIG, off at 185 PSIG. Low opens at 29 PSIG. High opens at 377 PSIG closes at 369 PSIG Learn More
  22. 7/16" Female Flare to M10 Male Switch Port

    7/16" Female Flare to M10 Male Switch Port

    $12.86

    This adapter will convert a male 7/16" switch port to a M10 switch port. Learn More
  23. 7/16" Female Binary Switch

    7/16" Female Binary Switch

    $8.75

    High low pressure switch for a/c systems. The high low pressure switch has a female 7/16" fitting that threads onto the receiver drier. The switch is designed to turn the system off if the head pressure gets to low or high. This will protect the compressor from being damaged if any problems occur in the system. Learn More
  24. 10mm Female Binary Switch

    10mm Female Binary Switch

    $19.99

    High low pressure switch for a/c systems. The high low pressure switch has a female 10mm metric fitting that threads onto the receiver drier. The switch is designed to turn the system off if the head pressure gets to low or high. This will protect the compressor from being damaged if any problems occur in the system. HP Open: 330 psi HP Closed: 225 psi LP Open: 40 psi LP Closed: 28 psi Learn More
  25. 10mm Aluminum Weld On Switch Port

    10mm Aluminum Weld On Switch Port

    $5.77

    10mm Aluminum Weld On Switch Port Learn More

Items 1 to 25 of 29 total

per page
Page:
  1. 1
  2. 2

Set Ascending Direction
Website Design by: LAVACK DESIGN