(800) 223-7167

Welcome

Compressors

9 Item(s)

per page

Set Descending Direction
  1. GM 1962-1973 New A6 Compressor

    GM 1962-1973 New A6 Compressor

    $425.00

    This is a new GM A6 Compressor. It has a single groove clutch with a 5 inch diameter. It is a 12 volt compressor and the coil is located at the 2:00 position. Interchange Part Numbers: AC Delco: 15-2224 APCO Air: 51-16571A, 51-16571L General Motors: 1131200, 1131571, 1131376 Learn More
  2. New OE Sanden SD7H15 Double V-Belt A/C Compressor

    New OE Sanden SD7H15 Double V-Belt A/C Compressor

    $235.00

    New Genuine Sanden SD7H15 a/c compressor. A SD7H15 compressor has seven cylinders in comparison to the SD508, SD510 and SD5H14 compressors which only had five cylinders. This compressor has a cubic inch displacement of 9.5 (155CC). This compressor can be used for R12 and R134a and ships full of oil. This is a genuine Sanden compressor, model number 4663. The compressor has an double v-belt clutch assembly with a pulley diameter of 125mm. The compressor rear head has standard oring fittings: discharge fitting #8 (3/4" - 16 thread) and suction fitting # 10 (7/8" - 14 thread). fitting # 10 (7/8" - 14 thread). Learn More
  3. New OE Sanden SD7H15 Serpentine A/C Compressor

    New OE Sanden SD7H15 Serpentine A/C Compressor

    $235.00

    This is a genuine New Sanden SD7H15 a/c compressor. A SD7H15 compressor has seven cylinders in comparison to the SD508, SD510 and SD5H14 compressors which only had five cylinders. This compressor has a cubic inch displacement of 9.5 (155CC). This compressor can be used for R12 and R134a and ships full of oil. This is a Sanden model number 4711. The compressor has an eight groove clutch assembly with a pulley diameter of 119mm. The compressor rear head has standard oring fittings: discharge fitting #8 (3/4" - 16 thread) and suction fitting # 10 (7/8" - 14 thread). Learn More
  4. New Sanden Style SD5H14 Chrome Serpentine A/C Compressor

    New Sanden Style SD5H14 Chrome Serpentine A/C Compressor

    $170.00

    New Sanden style Chrome SD5H14 a/c compressor. This is a SD5H14 compressor which has five cylinders and a cubic inch displacement of 8.4 (138cc). This compressor has the preferable Teflon seals and can be used with R12 and R134a. The compressor comes with a 7 groove serpentine clutch with a diameter of 119mm. This is a generic Chinese manufactured compressor which is equivalent to Sanden model number 4514. The compressor rear head has standard oring fittings: discharge fitting #8 (3/4" - 16 thread) and suction fitting # 10 (7/8" - 14 thread). The compressor ships fully charged with oil. Learn More
  5. New Sanden Style SD7B10 7170 Double Groove V-Belt Compressor

    New Sanden Style SD7B10 7170 Double Groove V-Belt Compressor

    $185.00

    New Sanden style SD7B10 a/c compressor. This compressor has a double v-belt clutch with a 115mm diameter of the pulley. This is an aftermarket Chinese compressor that is equivalent to Sanden model number 7170. The mount type of this compressor is a swing type and the compressor is compatible with R134a. The compressor ships full of oil. The compressor will require adapter fittings in order to make new hoses, we have two styles of compressor adapters available in our compressor adapters category. Learn More
  6. New Sanden Style SD7B10 7176 Serpentine Compressor

    New Sanden Style SD7B10 7176 Serpentine Compressor

    $185.00

    New Sanden style SD7B10 a/c compressor. This compressor has a six groove serpentine clutch with a 112mm diameter of the pulley. This is an aftermarket Chinese compressor that is equivalent to Sanden model number 7176. The mount type of this compressor is a swing type and the compressor is compatible with R134a. The compressor ships full of oil. The compressor will require adapter fittings in order to make new hoses, we have two styles of compressor adapters available in our compressor adapters category. Learn More
  7. New Sanden Style SD7H15 A/C Compressor with 5 1/4" Double V-Belt Clutch

    New Sanden Style SD7H15 A/C Compressor with 5 1/4" Double V-Belt Clutch

    $185.00

    New Sanden style SD7H15 a/c compressor. A SD7H15 compressor has seven cylinders in comparison to the SD508, SD510 and SD5H14 compressors which only had five cylinders. This compressor has a cubic inch displacement of 9.5 (155CC). This compressor can be used for R12 and R134a and ships full of oil. This is generic Chinese manufactured compressor which is equivalent to Sanden model number 4647. The compressor has an double v-belt clutch assembly with a pulley diameter of 132mm. The compressor rear head has standard oring fittings: discharge fitting #8 (3/4" - 16 thread) and suction fitting # 10 (7/8" - 14 thread). Learn More
  8. New Sanden Style SD7H15 Double V-Belt A/C Compressor

    New Sanden Style SD7H15 Double V-Belt A/C Compressor

    $185.00

    New Sanden style SD7H15 a/c compressor. A SD7H15 compressor has seven cylinders in comparison to the SD508, SD510 and SD5H14 compressors which only had five cylinders. This compressor has a cubic inch displacement of 9.5 (155CC). This compressor can be used for R12 and R134a and ships full of oil. This is generic Chinese manufactured compressor which is equivalent to Sanden model number 4663. The compressor has an double v-belt clutch assembly with a pulley diameter of 125mm. The compressor rear head has standard oring fittings: discharge fitting #8 (3/4" - 16 thread) and suction fitting # 10 (7/8" - 14 thread). Learn More
  9. New Sanden Style SD7H15 Serpentine A/C Compressor

    New Sanden Style SD7H15 Serpentine A/C Compressor

    $185.00

    New Sanden style SD7H15 a/c compressor. A SD7H15 compressor has seven cylinders in comparison to the SD508, SD510 and SD5H14 compressors which only had five cylinders. This compressor has a cubic inch displacement of 9.5 (155CC). This compressor can be used for R12 and R134a and ships full of oil. This is generic Chinese manufactured compressor which is equivalent to Sanden model number 4711. The compressor has an eight groove clutch assembly with a pulley diameter of 119mm. The compressor rear head has standard oring fittings: discharge fitting #8 (3/4" - 16 thread) and suction fitting # 10 (7/8" - 14 thread). Learn More

9 Item(s)

per page

Set Descending Direction
Website Design by: LAVACK DESIGN