Products

$8.68

Add to wishlist

# 8 90 Degree O-ring Fitting R-134a 16mm Discharge Port Barb

Female Oring 90 Degree w/Port

$9.29

# 8 90 Degree O-ring Fitting R1234yf 17mm Discharge Port

Add to wishlist

# 8 90 Degree O-ring Fitting R1234yf 17mm Discharge Port

Female Oring 90 Degree w/Port Steel fitting for R1234yf only

$31.30

Add to wishlist

# 8 90 Degree O-ring Fitting R1234yf 17mm Discharge Port

Female Oring 90 Degree w/Port. This is a steel fitting for reduced barrier hose and for use with R1234yf only.

$24.35

Add to wishlist

# 8 90 Degree O-ring Fitting R134a 16mm Discharge Port

Male insert oring 90 Degree

$18.60

Add to wishlist

# 8 90 Degree Oring Short Drop Fitting Barb

90 Degree Oring Short Drop Fitting

$9.33

# 8 90 Degree RotaLock with 16mm R134a Switch or Service Port

Add to wishlist

# 8 90 Degree RotaLock with 16mm R134a Switch or Service Port

90 Degree RotaLock with switch or service port fitting

$34.10

Add to wishlist

# 8 90 Degree Short Drop Fitting

Female Oring 90 Degree Short Drop

$13.58

Add to wishlist

# 8 90 Degree Short Drop Fitting

Female Oring 90 Degree Short Drop

$16.31

Add to wishlist

# 8 90 Degree Short Drop Fitting with 16mm Discharge Port

Female Oring 90 Degree Short Drop with Discharge Port

$16.50

Add to wishlist

# 8 90 Degree Tube-O Fitting

90 Degree Tube-O Fitting

$15.53

Add to wishlist

# 8 90 Degree Tube-O Fitting 1-4" R12 or Switch Port

90 Degree Tube-O Fitting with Port

$20.28

Add to wishlist

# 8 90 Degree Tube-O Fitting 16mm R134a

90 Degree Tube-O Fitting with Port

Male Insert O-Ring to Female O-Ring (3/4"-16 Threads) with High Side Inline Discharge Port R-134a 16mm Charging Ports / Valves

$15.57

Add to wishlist

# 8 Inline Hose Adapter with 10mm Switch Port

This is a #8 (3/4"-16) Female Oring to #8 (3/4"-16) Male Insert Oring Inline adapter with 10mm switch port. The 10mm switch port is ideal for metric switches or transducers.

# 8 3/4" -16 Thread Male Insert Oring Tee Adapter

$64.48

Add to wishlist

# 8 Male Insert Oring to # 6 Female Oring 90 Degree

$24.98

Add to wishlist

Oring to Flare Adapters

Female flare straight

$6.32

Add to wishlist

Add to wishlist

# 8 Straight O-ring Fitting

Male Oring Straight

$15.32

Straight Tube-O Fitting with Service Port

$22.83

$8.77

Add to wishlist

#10 (7/8"-14) Black Plastic Cap

#10 (7/8"-14) Black Plastic Cap Can be used for Male Insert Oring fittings found on Evaporators and Condensers

$1.38

Add to wishlist

#10 (7/8"-14) Female Oring Nut, Steel

Female Oring Nut, Steel #10 (7/8"-14 Thread)

$3.60

Add to wishlist

Female O-ring 135 Degree w/ Port

$10.27

Add to wishlist

#10 5/8" Male Insert Oring Weld on Nut

#10 Male Insert Oring Weld on Nut, Aluminum 7/8"-14" thread size, 5/8" tubing

#10 Male Insert Oring 90 Degree Fitting for Reduced Barrier Hose. Includes the fitting, two clamps and one clamp holder. Fitting end: #10 Hose end: #10 Thread size: 7/8"-14 BurgaClip Part Number: BC-54208-10-10

$24.23

#10 Male Insert Oring Adapter for Discharge Side on Sanden WX Read Head

Add to wishlist

#10 Male Insert Oring Adapter for Discharge Side on Sanden WX Read Head

#10 (7/8"-14) Male Insert Oring Adapter for Discharge Side on Sanden WX Read Head The pilot on the pad side measures 0.685"

$64.29

#10 Male Insert Oring Adapter for Suction Side on Sanden GSA Rear Head

Add to wishlist

#10 Male Insert Oring Adapter for Suction Side on Sanden GSA Rear Head

#10 (7/8"-14) Male Insert Oring Pad Adapter. Compressor Suction Fitting to adapt to GSA Sanden Rear Compressor head found on Kenworth and Peterbilt Applications

$17.97

Add to wishlist

#12 - #10 Female Oring Straight, BurgaClip Kit

#12 - #10 Female Oring Straight Fitting for Reduced Barrier Hose. Includes the fitting, two clamps and one clamp holder. Fitting end: #12 Hose end: #10 Thread size: 1 1/16"-14 BurgaClip Part Number: BC-54704-12-10

$14.42

Add to wishlist

#12 3/4" Male Insert Oring Weld on Nut

#12 Male Insert Oring Weld on Nut, Aluminum 1 1/16-14" thread size, 3/4" tubing

$12.23

#12 3/4" Male Insert Oring Weld on Nut, Steel

Add to wishlist

#12 3/4" Male Insert Oring Weld on Nut, Steel

#12 Male Insert Oring Weld on Nut, Steel 1 1/16-14" thread size, 3/4" tubing All weld on nuts are uncoated

$10.18

#12 90 Degree O-ring Fitting R1234yf 14mm Suction Port

Add to wishlist

#12 90 Degree O-ring Fitting R1234yf 14mm Suction Port

Female Oring 90 Degree w/Port This fitting is steel and for R1234yf only

$25.65

Add to wishlist

#12 90 Degree O-ring Fitting R1234yf 14mm Suction Port

Female Oring 90 Degree w/Port This fitting is steel and for R1234yf only

$32.61

Add to wishlist

#12 Aeroquip A/C Hose

# 12 Aeroquip A/C Hose For use with Aeroquip EZ Clip Fittings Only Hose ID = 15.9mm

$0.00

Add to wishlist

#12 BurgaClip Cage - Clamp Holder

For use with #12 Reduced Barrier Hose and BurgaClip fittings and clamps This item is for one clamp holder. You will need two clamps and a clamp holder to complete...

$1.65

Add to wishlist

#12 BurgaClip Stainless Steel Clamp

For use with #12 Reduced Barrier Hose and BurgaClip fittings and clamp holders This item is for one clamp. You will need two clamps and a clamp holder to complete...

$1.77

Add to wishlist

#12 EZ Clip Kit

# 12 Hose, EZ Clip The kit includes one cage and two clips

#12 Male Insert Oring Straight

$64.52

Add to wishlist

#12 Male Oring 90 Degree, BurgaClip Kit

#12 Male Oring 90 Degree Fitting for Reduced Barrier Hose. Includes the fitting, two clamps and one clamp holder. Fitting end: #12 Hose end: #12 Thread size: 1 1/16"-14 BurgaClip Part Number: BC-54214-12-12. Air Source MEI Part Number...

$22.14

Add to wishlist

#12 Male Oring 90 Degree, EZ Clip Kit

#12 Male Oring 90 Degree for EZ Clip Hose. Includes the fitting, one cage and two clips Fitting end: #12 Hose end: #12 Thread size: 1 1/16"-14 Eaton EZ Clip Part Number 4416EZ...

$48.50

Add to wishlist

#12 Male Oring Straight, BurgaClip Kit

#12 Male Oring Straight Fitting for Reduced Barrier Hose. Includes the fitting, two clamps and one clamp holder. Fitting end: #12 Hose end: #12 Thread size: 1 1/16"-14 BurgaClip Part Number: BC-54213-12-12. Air Source MEI Part Number...

$16.19

Add to wishlist

#6 Male Insert Oring Straight, EZ Clip Kit

#6 Male Insert Oring Straight

$38.43

Add to wishlist

#6 Male Oring 45 Degree, EZ Clip Kit

#6 Male Oring 45 Degree for EZ Clip Hose. Includes the fitting, one cage and two clips Fitting end: #6 Hose end: #6 Thread size: 5/8"-18

$27.83

Add to wishlist

#6 Male Oring 90 Degree, BurgaClip Kit

#6 Male Oring 90 Degree Fitting for Reduced Barrier Hose. Includes the fitting, two clamps and one clamp holder. Fitting end: #6 Hose end: #6 Thread size: 5/8"-18 BurgaClip Part Number: BC-54214-06-06, Air Source MEI Part Number 4398BC

$18.40

Add to wishlist

#6 Male Oring 90 Degree, EZ Clip Kit

#6 Male Oring 90 Degree for EZ Clip Hose. Includes the fitting, one cage and two clips Fitting end: #6 Hose end: #6 Thread size: 5/8"-18 EZ Clip Part Number 4398EZ

$20.00

Add to wishlist

#6 Male Oring Straight, BurgaClip Kit

#6 Male Oring Straight Fitting for Reduced Barrier Hose. Includes the fitting, two clamps and one clamp holder. Fitting end: #6 Hose end: #6 Thread size: 5/8"-18 BurgaClip Part Number: BC-54213-06-06, Air Source MEI Part Number 4389BC

$11.62

Add to wishlist

#6 Male Oring Straight, EZ Clip Kit

#6 Male Oring Straight for EZ Clip Hose. Includes the fitting, one cage and two clips Fitting end: #6 Hose end: #6 Thread size: 5/8"-18 EZ Clip Part Number 4389EZ

$21.32

Add to wishlist

#6 Male Springlock Clear Cap

# 6 Male Springlock Clear Cap

$0.50

Add to wishlist

#6 Quick Disconnect Fitting Straight

Quick Disconnect (QD) Thread to #6 Hose Straight

$8.59

Add to wishlist

#8 (3/4"-16) Female Oring Nut, Steel

Female Oring Nut, Steel #8 (3/4"-16 Thread)

$2.12

Add to wishlist

#8 (3/4"-16) Male Insert Oring Aluminum Cap

$2.25

Add to wishlist

Female O-ring 135 Degree w/ Port

$10.57

#8 90 Female Oring Fitting with Top R-134a 16mm Discharge and 10mm Switch Port

Add to wishlist

#8 90 Female Oring Fitting with Top R-134a 16mm Discharge and 10mm Switch Port

This is a # 8 (3/4"-16) 90 Degree Female Oring Fitting with high side port. It will screw onto a Sanden oring compressor discharge fitting. It includes a 10mm switch...

#8 Female Oring 45 Degree for EZ Clip Hose. Includes the fitting, one cage and two clips Fitting end: #8 Hose end: #8 Thread size: 3/4"-16 EZ Clip Part Number 4407EZ

$25.06

#8 Female Oring 90 Degree to #8 Male Insert Oring with Four 3/8"-24 Female Ports

Add to wishlist

#8 Female Oring 90 Degree to #8 Male Insert Oring with Four 3/8"-24 Female Ports

#8 Female Oring 90 Degree to #8 Male Insert Oring with Four 3/8"-24 Female Ports 4 Female Ports for different locations of charge and switch ports.

$31.30

Add to wishlist

#8 Female Oring 90 Degree w/7/16" R12 or Switch Port, EZ Clip Kit

#8 Female Oring 90 Degree w/7/16" R12 or Switch Port for EZ Clip Hose. Includes the fitting, one cage and two clips Fitting end: #8 Hose end: #8 Port: 7/16"-20 Thread size: 3/4"-16

$47.76

#8 Female Oring 90 Degree w/R-134a 16mm Discharge Port and 10mm Switch Port, EZ Clip Kit

Add to wishlist

#8 Female Oring 90 Degree w/R-134a 16mm Discharge Port and 10mm Switch Port, EZ Clip Kit

#8Female Oring 90 Degree w/R-134a 16mm Discharge Port and 10mm Switch Port for EZ Clip Hose. Includes the fitting, one cage and two clips Fitting end: #8 Hose end: #8 Port: 16mm R134...

$69.09

Add to wishlist

#8 Female Oring 90 Degree w/R-134a 16mm Discharge Port, BurgaClip Kit

#8 Male Insert Oring Adapter for Discharge Side on Sanden GSA Rear Head

Add to wishlist

#8 Male Insert Oring Adapter for Discharge Side on Sanden GSA Rear Head

#8 (3/4"-16) Male Insert Oring Discharge Pad Fitting. Compressor Discharge Fitting to adapt to GSA Sanden Rear Compressor head found on Kenworth and Peterbilt applications.

$30.00

#8 Male Insert Oring Adapter for Discharge Side on Sanden GWA Rear Head

Add to wishlist

#8 Male Insert Oring Adapter for Discharge Side on Sanden GWA Rear Head

#8 (3/4"-16) Male Insert Oring Adapter to 0.606 Pilot. Compressor Discharge Fitting to adapt to GWA Sanden Rear Compressor head found on International/Navistar and Volvo Applications

$26.99

Add to wishlist

#8 Male Insert Oring Adapter for Discharge Side on Sanden WV Rear Head

#8 Male Insert Oring Adapter for Discharge Side on Sanden WV Rear Head. The male insert oring side accepts a #8 (3/4"-16) Female Oring fitting Can also be used as...

$28.00

#8 Male Insert Oring Adapter for Discharge Side on Sanden WX Read Head

Add to wishlist

#8 Male Insert Oring Adapter for Discharge Side on Sanden WX Read Head

#8 (3/4"-16) Male Insert Oring Adapter for Discharge Side on Sanden WX Read Head The pilot on the pad side measures 0.460"

$22.86

Add to wishlist

#8 Male Insert Oring Straight, BurgaClip Kit

#8 Male Insert Oring Straight Fitting for Reduced Barrier Hose. Includes the fitting, two clamps and one clamp holder. Fitting end: #8 Hose end: #8 Thread size: 3/4"-16 BurgaClip Part Number: BC-54206-08-08

$18.49

Add to wishlist

#8 Male Insert Oring Straight, EZ Clip Kit

$19.99

Add to wishlist

12" Auxiliary Straight Blade Universal Electric Condenser Fan

12" Auxiliary Electric Fan to be mounted on the front of the a/c condenser Reversible: Pusher or Puller Straight Blade 80 Watts 12V CFM 750

$78.58

Add to wishlist

12" Piece of Insulation Cork Tape

Insulation Cork Tape. This piece is 12" long by 2" wide. Cork tape is used for covering the expansion valve and for insulation the lines in the system. This piece...

$5.00

Add to wishlist

12mm Aluminum Weld On Switch Port

12mm Aluminum Weld On Switch Port If you need the valve, it takes p/n V101 Standard Valve Core

$46.67

Add to wishlist

1998-2005 Crown Vic Condenser Adapters

1998-2005 Crown Vic Condenser Adapters. Allows you to connect a #8 Female Oring. Condenser inlet (Discharge) will require a #8 Female Oring (BL1302, BL1312, BL1322) Condenser outlet (Liquid Line) will require...

$85.00

Add to wishlist

1998-2006 Wrangler Cycling Switch

Jeep Wrangler low pressure cycling switch. The switch attaches to the accumulator drier. OE part number: 5015872AC

$24.99

Add to wishlist

1998-2006 Wrangler High Pressure Switch

Jeep Wrangler high pressure switch. Switch attaches to the hose from the compressor to condenser. OE part number: 4897617AA

$24.99

1999-2003 Ford Windstar Van Rear A/C Block Off Fittings

Add to wishlist

1999-2003 Ford Windstar Van Rear A/C Block Off Fittings

1999-2003 Ford Windstar Van Rear A/C Block Off Fittings Used to Block off Rear A/C1997 Ford Aerostar1999-2002 Mercury Villager1999-2003 Ford Windstar2005-2007 Ford Freestyle2008-2009 Ford Taurus X

$50.00

1999-2004 Ford Mustang Condenser Adapters

Add to wishlist

1999-2004 Ford Mustang Condenser Adapters

1999-2004 Ford Mustang Condenser Adapters commonly needed in Coyote Motor Swaps These adapters will fit the inlet and outlet on the condenser and convert it to a #8 Male Insert...

$78.00

Add to wishlist

1999-2006 Wrangler A/C Accumulator Drier

1999-2006 Jeep Wrangler A/C Accumulator Drier. The accumulator drier includes the 12mm switch port for the clutch cycling switch and the connections for the two suction hoses. Outer Diameter: 88mm ...

$39.99

Add to wishlist

1999-2007 F250 F350 With 5.9 Cummins Swap

1999-2007 F250 F350 With 5.9 Cummins Swap. For Fords with one alternator from factory. Kit Includes: Compressor manifold block with sealing washers Suction Line with No Rear AC Discharge line...

$250.00

Add to wishlist

2" Duct Hose Per Foot

Ford DKS-17DS, FS18, FS20 Suction and Discharge Block Fittings. These blocks fit the compressor in the 2011-2017 Ford 5.0L Coyote Engine. These blocks fit the FS18 and FS20 compressors found...

$59.50

2012-2016 Chrysler Town and Country Dodge Caravan Rear AC Block Off Fittings

Add to wishlist

2012-2016 Chrysler Town and Country Dodge Caravan Rear AC Block Off Fittings

2012-2016 Chrysler Town and Country Dodge Caravan Rear AC Block Off Fittings Used to Block off Rear A/C2012-2016 Chrysler Town and Country2012-2016 Dodge Caravan2012-2014 Volkswagen Routan

$43.33

2014-2022 Hemi 6.4L Denso 7SBH17C Compressor Adapter Set

Add to wishlist

2014-2022 Hemi 6.4L Denso 7SBH17C Compressor Adapter Set

2014-2022 Denso 7SBH17C Compressor Adapter Set The adapter set has a #8 (3/4"-16) and #10 (7/8"-14) Male Insert Oring Fitting. It will accept a #8 and #10 Female Oring Fitting

$78.00

2015-2020 Chevy Suburban/GMC Yukon/Escalade Rear AC Block Off Fittings

Add to wishlist

2015-2020 Chevy Suburban/GMC Yukon/Escalade Rear AC Block Off Fittings

2015-2020 Chevy Suburban/GMC Yukon/Escalade Rear AC Block Off Fittings Used to block off rear ac in the following applications 2015-2020 Chevrolet Suburban/Tahoe 2015-2020 GMC Yukon/Yukon XL 2015-2020 Cadillac Escalade

$10.99

Add to wishlist

3/8"-24 Male to M10-1.25 Male Conversion Fitting

3/8"-24 Male to M10-1.25 Male Conversion Fitting Includes Shrader Valve

$7.99

Add to wishlist

3/8"-24 Male to M11 x 1.5 Female Conversion Fitting

$5.75

Add to wishlist

3/8"-24 Male to M12-1.50 Male Conversion Fitting

3/8"-24 Male to M12-1.50 Male Conversion Fitting Includes Shrader Valve

$5.99

Add to wishlist

3/8"-24 to 13mm R134a Low Side Adapter

3/8"-24 to 13mm R134a Low Side Adapter Will allow you to convert a female 3/8"-24 port to a low side charging port.

$16.52

Add to wishlist

3/8"-24 to 16mm R134a High Side Adapter

3/8"-24 to 16mm R134a High Side Adapter Will allow you to convert a switch port on a drier or an adapter to a high side port.

$13.04

Add to wishlist

Charging Ports / Valves

$5.99

97-98 Jeep Wrangler Condenser Outlet Fitting with Orifice Tube

Add to wishlist

97-98 Jeep Wrangler Condenser Outlet Fitting with Orifice Tube

1997-1998 Jeep Wrangler Condenser Outlet Fitting with Orifice Tube This adapter allows you to use the stock condenser in a motor swap and retain the orifice tube in the same...

$92.86

-8%

Add to wishlist

Aluminum and Steel Hose Repair Kit with 25ft Hose Sections

Aluminum and Steel Hose Repair Kit. It includes weld on aluminum and steel barbs with ferrules to repair factory a/c hoses. The kit includes the following: 25ft #6 5/16" Hose...

~~$849.46~~ $779.99

-9%

Aluminum and Steel Hose Repair Kit with 50ft Hose Sections

Add to wishlist

Aluminum and Steel Hose Repair Kit with 50ft Hose Sections

Aluminum and Steel Hose Repair Kit. It includes weld on aluminum and steel barbs with ferrules to repair factory a/c hoses. The kit includes the following: 50ft #6 5/16" Hose...

~~$1,292.45~~ $1,179.99

Add to wishlist

Aluminum Manifold Set

R134a Refrigerant Manifold Gauge Set (Aluminum) 72" Hose Set Manual Couplers Anti-Blowback on Service Line Protective Rubber Gauge Covers

$92.99

Add to wishlist

Aluminum Tube 1/2" OD x .049" W x 5FT Long

Aluminum Tube 1/2" OD x .049" W 5FT Long Section

$40.00

Add to wishlist

Aluminum Tube 3/8" OD x .049" W x 5FT Long

Aluminum Tube 3/8"" OD x .049" W 5FT Long Section

$50.00

Add to wishlist

Aluminum Tube 5/8" OD x .049" W x 5FT Long

Aluminum Tube 5/8" OD x .049" W 5FT Long Section

$50.00

Aotecar E34300A-0065H Electric Compressor Suction and Discharge Block Fitting Set for Oring Compressors

Add to wishlist

Aotecar E34300A-0065H Electric Compressor Suction and Discharge Block Fitting Set for Oring Compressors

Aotecar E34300A-0065H Electric Compressor Suction and Discharge Block Fitting Set for Oring Compressors The discharge block has a #8 (3/4"-16 thread) male insert oring fitting The suction block has a...

$65.00

Add to wishlist

Black GM 5/8" Thick Sealing Washer

Black GM 5/8" Thick Sealing Washer Qty. 1 Each Color: Black Compressor Type: GM Part Type: Sealing Washer Rubber ID: 15.24mm Steel OD: 29.51mm

$1.00

Add to wishlist

Block Expansion Valve

Block Expansion Valve Suction Inlet Thread Size: 3/4"-18 (#8) Suction Outlet Thread Size: 7/8"-18 (#10) Liquid Inlet Thread Size: 5/8"-18 (#6) Liquid Outlet Thread Size: 3/4"-18 (#8) Tonnage 1.5 Refrigerant R134a...

$24.99

Add to wishlist

Block Expansion Valve, 2 Tons

Block Expansion Valve Suction Inlet Thread Size: 7/8"-18 (#10) Suction Outlet Thread Size: 7/8"-18 (#10) Liquid Inlet Thread Size: 5/8"-18 (#6) Liquid Outlet Thread Size: 3/4"-18 (#8) Tonnage: 2 Refrigerant...

$24.99

Add to wishlist

Brass Manifold Set

R134a Refrigerant Manifold Gauge Set (Brass) 72" Hose Set Automatic Quick Couplers Anti-Blowback on Service Line Protective Rubber Gauge Covers

$99.99

Buick Chevy GMC Accumulator Drier with Standard Threads

Add to wishlist

Buick Chevy GMC Accumulator Drier with Standard Threads

Accumulator Drier with standard threads Fits many applications including: Buick, Chevy and GMC Diameter: 3.50" Height: 9" Inlet Size: #12 (1 1/16"-14) Outlet Size: #12 (1 1/16"-14) 1/4" Male R12...

$29.99

Add to wishlist

Build A Custom AC Hose

The custom a/c hose build page is to allow customers to purchase barrier hose by the inch with two fittings. The page will give us the information necessary to ship...

$40.00

Add to wishlist

Build A Custom Hose

The custom a/c hose build page is to allow customers to purchase barrier hose by the inch with two fittings. The page will give us the information necessary to ship...

$0.00

Add to wishlist

BurgaClip Pliers

Crimping tool for BurgaClip Fittings All sizes: #6-#14 Reduced Barrier Hose Compatible with AirSource MEI Part Number 8758BC

$258.39

-6%

Add to wishlist

Bus AC Inline Receiver Drier

Bus AC Inline Receiver Drier Compatible with the following OEM part numbers: WSG164FO, WSG-164FO, DR001A Drier Specifications: Diameter: 2.5" Length: 6.5" Fitting Inlet/Outlet: #8 Male Flare

~~$45.00~~ $42.38

Cadillac Chrysler 10S17 10SRE18C 10SRE20C Compressor Suction and Discharge Block Fitting Set for Oring Compressors

Add to wishlist

Cadillac Chrysler 10S17 10SRE18C 10SRE20C Compressor Suction and Discharge Block Fitting Set for Oring Compressors

5.7L Chrysler Hemi Compressor Block. Fits 10S17 Compressors and 10SRE18C and 10SRE20C Compressors from 2011-2014 Jeep and Dodge The discharge block has a #8 (3/4"-16 thread) male insert oring fitting...

$65.00

-1%

Add to wishlist

Carrier AC Accumulator Drier

Carrier AC Accumulator Drier, Generic Brand Compatible with Carrier part number: 65-62004-00, 10430 Drier Specifications: Diameter: 3.94" Length: 9.84" Fitting Inlet/Outlet: #12 Male Insert oring

~~$74.29~~ $73.25

Add to wishlist

Case IH International Navistar AC Receiver Drier

Case IH International Navistar AC Receiver Drier Compatible with part numbers: 118304C1, 118418C1, 08802300, 544983C1 Drier Specifications: Diameter: 4" Height: 6.75" Fitting Inlet/Outlet: #6 Male Insert Oring

$50.80

Add to wishlist

Caterpillar 176-3900 Generic Accumulator Drier

Aftermarket Accumulator Drier. Has #12 (1 1/16"-16) Female Oring Inlet and Outlet Fittings. The accumulator is 3.50" in diameter and 9.75" tall OEM compatible part numbers: 186-6190, 176-3900, 152-2823, 416-5513, F124088

$50.30

-7%

Add to wishlist

Caterpillar AC Inline Drier with Orifice Tube

Caterpillar AC Inline Drier with Orifice Tube, Generic Brand Compatible with the following part numbers: 257-3227, 257-3226, 07-5056A Drier Specifications: Diameter: 2.50" Length: 11" Fitting Inlet: #6 Male Insert Oring Fitting Outlet:...

~~$57.14~~ $52.99

Chevrolet P30 and GMC P3500 AC Receiver Drier

Add to wishlist

Chevrolet P30 and GMC P3500 AC Receiver Drier

Chevrolet P30 (1997-1999) GMC P3500 (1997-1999) AC Receiver Drier Compatible with part numbers: 088370, 08837000, 330382A, 12375379, 7514 Drier Specifications: Drier Diameter: 2.50" Drier Height: 6.25" Fitting Inlet: 18mm Fitting Outlet: Quick Disconnect Fitting (QD)...

$24.00

Add to wishlist

Compressor to Condenser Discharge Hose - Kenworth Applications

Compressor to Condenser Discharge Hose - Kenworth Applications Compatible with the following OEM part numbers: D9031-1549, D9031-1541, F50-1089-1125

$90.00

Add to wishlist

Core Tie Strap and Clip Mount Kit

Core Tie Strap and Clip Mount Kit Used for adding universal auxiliary condenser fans

$11.99

Custom Fitting Made with Customer's Manifold Fittings

Add to wishlist

Custom Fitting Made with Customer's Manifold Fittings

The customer shipped us his original compressor manifold fittings and we welded male insert oring fittings onto his blocks. Now he is able to connects his fittings and use a...

$68.00

-46%

Add to wishlist

Daf XF 95 Truck AC Receiver Drier

Daf XF 95 Truck AC Receiver Drier Compatible with the following OEM part number: 1290592 Drier Specifications: Diameter: 2.05" Length: 5" Fitting Inlet/Outlet: #6 Male Flare

~~$37.14~~ $19.99

Add to wishlist

Denso 10PA 10S Coil 12 Volt

Denso 10PA 10S Coil 12 Volt Generic Brand Coil OD 96.4mm Coil ID 61.6mm Mounting ID 40mm Thickness 27.66mm 2 Wire

$44.57

Add to wishlist

Denso 10PA, TV Compressor Clutch Bearing

AC Compressor Clutch Bearing Fits the following compressors: Denso: 10PA15 Series, 10PA17 Series, 10PA20C, 10PA20H, 10PA20J, 10PA20SC, 10PA20SH, 10PA20VC, 10S13C, 10S13P, 10S15C, 10S15L, 10S17C, 10S20C, 10S20F, 10S20H, 10SR15C, 10SR17C, TV10...

$29.99

Denso 10S17F 10S20F 10SE18F Suction and Discharge Compressor Adapters for Sealing Washer Compressor

Add to wishlist

Denso 10S17F 10S20F 10SE18F Suction and Discharge Compressor Adapters for Sealing Washer Compressor

GM Nippondenso (Denso) 10S17F & 10S20F & 10SE18F (Sealing Washer) compressor adapters used to convert a stock compressor to aftermarket hoses. The adapters are standard #8 discharge and #10 suction fittings....

$69.50

Add to wishlist

DKS, SD, Mat Compressor Clutch Bearing

AC Compressor Clutch Bearing Fits the following compressor types: Calsonic: CR14, CSV613, CWV615, CWV617, CWV618, DKV14D Diesel Kiki: DCV11A, DCV14A, DCV14J, DCW17B, DCW17D, DKS13CH, DKS13G (DUAL), DKS13G (SINGLE), DKS13S, DKS15BH,...

$29.99

Add to wishlist

DKV14C, 10P, SD5 Compressor Clutch Bearing

AC Compressor Clutch Bearing Fits the following compressor types: Calsonic: CWV615, CWV617, CWV618 Denso: 10P13 Series, 10P15 Series, 10P17 Series Hitachi: MJS170 Mitsubishi: MSC105CVS, MSC90, MSC90C Nihon: DKV14C Sanden: SD507,...

EZ Clip Pliers For #4, #6, #8, #10 and #12 Clips

$149.25

Add to wishlist

EZ Clip Universal Hose Kit

EZ Clip Universal Hose Kit The EZ Clip refrigerant hose is easy to assemble without needing a crimper. You will need the EZ Clip Pliers to install the fittings to...

$449.00

-36%

Add to wishlist

Farm and Offroad AC Receiver Drier

Farm and Offroad AC Receiver Drier Compatible with the following OEM part numbers: 3500-1, 24803401, 24803401 Drier Specifications: Diameter: 4" Height: 6" Fitting Inlet/Outlet: #6 Male Flare Fuse Plug

Foaming Condenser Cleaner 18oz Powerful foaming action penetrates deep between the condenser fins for superior cleaning. Enhances airflow for maximum cooling performance and extends system life.

$19.99

Add to wishlist

Foaming Evaporator Cleaner with Odor Control, 16oz

Foaming Evaporator Cleaner with Odor Control, 16oz Powerful foaming actions fills evaporator case to ensure complete surface cleaning. kills odor causing contaminants. Restores fresh, neutral scent. Fast acting, no rinse...

$19.99

Ford Accumulator Drier with Threaded Fittings

Add to wishlist

Ford Accumulator Drier with Threaded Fittings

Accumulator Drier, Ford Applications Inlet Fitting: #10 Male Insert Oring Outlet Fitting: #12 Male Insert Oring Diameter: 3.50" Length: 8" Compatible with OEM part numbers: F4TZ-19C836-A, YF-2386, YF-1335, F6HH-19C808-BA. F6HZ-19C836-BA, F6TH-19C808-AA, F6TZ-19C836-AA, 33091

$44.99

Add to wishlist

Ford Blue Orifice Tube

Ford Blue Orifice Tube Orifice Size .057"

$2.29

Add to wishlist

Ford Brown Orifice Tube

Ford Brown Orifice Tube Orifice Size .047"

$2.29

Add to wishlist

GM Female Clutch Cycling Switch M12 x 1.50 Normally Open Closed: 44psi Open: 24psi

$9.99

Ford FS10 90 Degree Oring Compressor Block

Add to wishlist

Ford FS10 90 Degree Oring Compressor Block

Ford compressor hose adapter. This adapter will allow you to use a Ford FS-10 a/c compressor with an aftermarket a/c system or aftermarket hose kit. The adapter is designed to...

Oring Expansion Valve Inlet # 6 (5/8"-18) Outlet #8 (3/4"-16) Capillary Length 8"

$19.99

Add to wishlist

FX15, FX10, NVR Compressor Clutch Bearing

AC Compressor Clutch Bearing Fits the following Compressor types: Behr: Wingcell Bosch: Axial Diesel Kiki: DKS16H (R12), DKS16H (R134A) Ford: FS10, FS18, FX15 Nihon: DKV14B, NVR140S Visteon: HS15, HS17, HS18...

$29.99

Generic Receiver Drier #6 Male O-Ring with 7/16" and 10mm Switch Ports

Add to wishlist

Generic Receiver Drier #6 Male O-Ring with 7/16" and 10mm Switch Ports

Universal Generic Receiver Drier. Has #6 3/8" Male O-ring Inlet and Outlet fittings. The diameter of the drier is approximately 2.5" and the height is 8". This drier has a...

GM Compressor Double Swivel 180 Degree The hose crimps are for #8 (13/32") and #12 (5/8") Hose. Equivalent to Four Seasons 12019 part number

$65.00

Add to wishlist

GM Compressor Double Swivel 90 Degree

GM Compressor Double Swivel 90 Degree The hose crimps are for #8 (13/32") and #12 (5/8") Hose. Equivalent to Four Seasons 12034 part number

$65.00

Add to wishlist

GM Compressor Horizontal Block Fitting with #8 and #10 Oring Fittings

Block fitting with 8 and 10 Male insert Oring fittings

$25.00

Add to wishlist

GM Compressor Single Pad Block Discharge and Suction Fittings

Single Pad Block with Oring Discharge and Suction Fittings

$25.00

Add to wishlist

GM Compressor Single Pad Block Discharge Fitting

Single Pad Block with Oring Discharge Fitting

$15.77

Add to wishlist

GM Compressor Single Pad Block Suction Fitting

Single Pad Block with Oring Suction Fitting

$15.00

GM Compressor Vertical Block Fitting with #8 and #10 Oring Fittings

Add to wishlist

GM Compressor Vertical Block Fitting with #8 and #10 Oring Fittings

Block fitting with #8 and #10 Male insert Oring fittings.

$65.00

Add to wishlist

GM LS1 LS2 Style Horizontal Compressor Block. #8 Discharge and #10 Suction Oring Fittings. The discharge port has a raised face.

$48.50

GM LS1 LS2 Style Vertical Raised Face Compressor Block

Add to wishlist

GM LS1 LS2 Style Vertical Raised Face Compressor Block

GM LS1 LS2 Style Vertical Raised Face Compressor Block. #8 Discharge and #10 Suction Oring Fittings. The discharge port has a raised face.

$48.50

GM LS1 Style Vertical Raised Face Reversed Compressor Block

Add to wishlist

GM LS1 Style Vertical Raised Face Reversed Compressor Block

GM LS1 Style Vertical Raised Face Reversed Compressor Block. This block is the same as P/N AA0443 but the fittings are reversed. #8 Discharge and #10 Suction Oring Fittings. The...

$48.50

GM LT Corvette LS3 CVC Horizontal Compressor Block

Add to wishlist

GM LT Corvette LS3 CVC Horizontal Compressor Block

This adapter will allow you to use the stock compressor on a LT Crate engine, LS-3 engine with an aftermarket air conditioning system. The adapter is designed to fit on...

GOLD Barb. 1/2" OD Tube to #8 Hose ** NO RETURNS ON CLEARANCE FITTINGS **

~~$5.04~~ $2.52

Add to wishlist

Grommet Dual Hose # 6 and # 10

Grommet is used for #6 and #10 air conditioning hose to route through the firewall in the same grommet. The grommet has three holes for screws to secure it to...

$2.20

Add to wishlist

Hand Held Hydraulic A/C Hose Crimping Tool For Standard and Reduced Barrier Hose

Bubble style a/c hose crimping tool. Tool includes five sets of dies for standard and reduced barrier hose. Dies snap quickly into place requiring no pins or screws. This is...

$419.99

Add to wishlist

Heater Control Valve

Cable operated heater control valve to control the water flow into the heater. If your a/c system is allowing hot water into the heater core while the a/c is on...

$24.99

Add to wishlist

Heater Control Valve Cable

Heater Control Valve Cable You can use this cable to operate the heater control valve and mount it on your dash or under your dash. Overall Length: 28.375"

Hose Cutter - Heavy Duty Metal Body Use to cut both standard and reduced barrier air conditioning hose

$19.99

Add to wishlist

Hybrid AC Oil - 8 Ounce Bottle

Hybrid AC Oil - 8 Ounce Bottle Synthetic lubricant for use in Electric Hybrid Mobile Air Conditioning Compressors. For use in Hybrid vehicle R134a systems only.

Insulation Cork Tape. A roll is 30 ft long by 2 inches wide. Cork tape is used for covering the expansion valve and for insulating the lines in the system....

$29.99

Add to wishlist

Jeep Wrangler TJ 2000-2006 Hose Kit for a Motor Swap. This is a complete hose kit to make all four a/c lines on a 2000-2006 Jeep Wrangler TJ. The kit includes a...

$182.42

Jeep Wrangler TJ 2000-2006 with LS SD7B10 Compressor Motor Swap Hose Kit

Add to wishlist

Jeep Wrangler TJ 2000-2006 with LS SD7B10 Compressor Motor Swap Hose Kit

Jeep Wrangler TJ 2000-2006 with LS SD7B10 Compressor Motor Swap Hose Kit This Kit provides you with the following: Accumulator Adapters (You will move your accumulator forward off of the...

$299.00

Add to wishlist

John Deere Receiver Drier with #6 Male Flare Fittings

Aftermarket Receiver Drier 4" Diameter 8" Height Fitting Inlet/Outlet - #6, Male Flare Fittings Side Sight Glass Fuse Plug OEM compatible part numbers: AH234097, AH84591

Charging Ports / Valves

$2.99

Add to wishlist

Male 3/8"-24 Trinary Switch

This is a male trinary switch that has 3/8"-24 threads. The switch can be installed on a receiver drier or on a fitting on the high side of the system. ...

$15.99

Add to wishlist

Male Binary Switch 3/8" - 24

High low pressure switch for a/c systems. The high low pressure switch has a male fitting 3/8"-24 that threads into the receiver drier. The switch is designed to turn the...

$9.99

Add to wishlist

Male Quick Disconnect Fitting with Low Side Charge Port Welded on

This is a custom fitting that was made for a customer. It is a #12 Male Quick disconnect straight with a low side charge port welded on.

$24.98

-43%

Add to wishlist

Man Truck AC Receiver Drier

Man Truck AC Receiver Drier This Drier fits the following Man Trucks: E2000, F2000, L2000, M2000L, M2000M Compatible with the following OEM part numbers: 81619106012, 81619100013 Drier Specifications: Drier Height: 11.42" Drier...

~~$52.86~~ $29.99

Add to wishlist

$120.00

Add to wishlist

Master Technician Series Box 3 or MT9260 Kit - Primary Caps and Valve Cores

Master Technician Series Box 3 or MT9260 Kit - Primary Caps and Valve Cores 23 Part Numbers - 90 Pieces

$110.00

Add to wishlist

Metric Threaded Inline Receiver Drier

Inline Receiver Drier Fitting Inlet: M18x1.5 Fitting Outlet: M20x1.5 Diameter: 2.5" Length: 6.5" Comaptible with OEM part numbers: 15982368, 33460, 7503, 085682

$22.99

-26%

Add to wishlist

Minneapolis Moline Tractor AC Receiver Drier

Minneapolis Moline Tractor AC Receiver Drier, Generic Brand Fits Minneapolis Moline Tractors: G1355, G955 Also fits Dodge and Plymouth Applications Compatible with OEM part numbers: 20-7000465 Drier Specifications: Diameter: 2.5" Height:...

~~$27.14~~ $19.99

Add to wishlist

Mitsubishi MSC90C, 105C Compressor Clutch Bearing

$40.00

Add to wishlist

New Aftermarket Inline Bus Receiver Drier

Aftermarket Inline Bus Receiver Drier 2.5" Diameter 6.5" Height Fitting Inlet/Outlet - #8 - 1/2" Male Flare Side Sight Glass OEM compatible part numbers: WSG-164FO, 8003016, 1999236, 3710868, WSG164FO, 171086, 073064A

$22.40

Add to wishlist

New Aftermarket Inline Bus Receiver Drier

Aftermarket Inline Bus Receiver Drier 3" Diameter 10" Height Fitting Inlet/Outlet - #8 - 1/2" Male Insert Oring OEM compatible part numbers: ADK304, WSG304MO, 33724, 170600

$32.50

Add to wishlist

New Aftermarket Inline Carrier Receiver Drier

Aftermarket Inline Carrier Receiver Drier 2.5" Diameter 6.75" Height Fitting Inlet/Outlet - #8 - 1/2" Male Flare OEM compatible part numbers: 101-03/212006, 101303, 212006, 8003012, 208122, WAHA164, RD54947OP, ARD1046, 073053A

$22.00

Add to wishlist

New Aftermarket Inline Receiver Drier

Aftermarket Inline Bus Receiver Drier 3" Diameter 10" Height Fitting Inlet/Outlet - #8 - 1/2" Male Flare OEM compatible part numbers: 0400201, 140032611, 8003040, 33996, WAH304, 170866, 2112010, 073055A

$22.00

New Aftermarket Mitsubishi Receiver Drier

Add to wishlist

New Aftermarket Mitsubishi Receiver Drier

Aftermarket Receiver Drier. 2.25" Diameter 6.50" Height Fitting Inlet/Outlet - Pad Mount OEM compatible part numbers: MB898319, 218615, 83081

$18.00

Add to wishlist

New Aftermarket SUV Accumulator

Aftermarket Accumulator 3.50" Diameter 9.00" Height Fitting Inlet/Outlet - Pad Mount OEM compatible part numbers: 89018424, 11602541, 705082, 83210, 1132824, RD1359, 408001, 170055, 4562N

$35.00

Add to wishlist

New Audi Generic Accumulator

Aftermarket Accumulator 3.50" Diameter 9.00" Length 27mm Male Insert Oring - Fitting In 27mm Female Oring - Fitting Out OEM compatible part numbers: 4A0820191AA, 208745, 4A0820191, 4288, 33331

$18.00

Add to wishlist

New Audi/Volkswagen Generic Drier

$29.85

New Ford Receiver Drier with #6 Male Oring Fittings

Add to wishlist

New Ford Receiver Drier with #6 Male Oring Fittings

Aftermarket Receiver Drier 3" Diameter 10" Height Fitting Inlet/Outlet - #6, 3/8"Male Insert Oring Mount Bracket 1987-1993 L Series Ford OEM compatible part numbers: 1510799, E7HZ19959A, 936101, TEM936101, 9705765

$23.95

-20%

Add to wishlist

New Generic Caterpillar AC Compressor

New Generic Caterpillar Compressor with Clutch CO11121JC 1 Groove Clutch 136mm Clutch Diameter 24 Volt Coil Compatible with OEM part numbers: 10365041, 3017951, 1761895, 2013837, 2316984, 2457781, 198319, 0949G0101, 295789N, 05295789, 407890, 2014259, 140123, C2389, 3003810

~~$219.99~~ $175.00

Add to wishlist

New Generic Caterpillar Receiver Drier

Aftermarket Receiver Drier 4" Diameter 8" Height Fitting Inlet/Outlet - Quick Disconnect 1 Female Switch Port Top Sight Glass OEM compatible part numbers: 9W-0549, 106-5532, 8T-8642, 106-5533

$41.98

-13%

Add to wishlist

New Generic Mercedes Compressor 6 Groove Clutch 110 Pulley Diameter 12 Volt Coil Compatible with OEM Part numbers: 0008302100, 0008302500, 3019501, C3083, 141117 All sales final on clearance compressors

~~$300.00~~ $245.00

Add to wishlist

New Generic Receiver Drier with Metric Threads

Kia Sportage Receiver Drier with Metric Threads. Can also be used in universal applications 2.5" Diameter 8" Height Fitting Inlet/Outlet - 18 MM Male Oring - 8.8MM Pilot Top Sight...

$21.58

Add to wishlist

New Generic Saab Receiver Drier

Aftermarket Receiver Drier Saab 4071007 Alfa Romeo/Case/New Holland 3" Diameter 10 1/2" Height Fitting Inlet- #6, 3/8" Male Oring Fitting Outlet- #6, 3/8" Female Oring Side Sight Glass Male Switch Port,...

$37.05

Add to wishlist

New GM Generic Accumulator

GM Accumulator, 1999-2007 Chevrolet Pickup/4.3L Engines 3.50" Diameter 9.50" Height Fitting Inlet/Outlet - PAD OEM compatible part numbers: 2724985, 151800, 11609081, 705081, 2071052, 1132818, 408563, 17011A

$19.90

Add to wishlist

New GM SUV Generic Accumulator

GM SUV Generic Accumulator 3.50" Diameter 9" Height Fitting Inlet/Outlet - PAD OEM compatible part numbers: 1132754, 151820, T83290, 11620251, 2071219, 1132755, 408907, TEM408907, 83290, 4485, F637

$25.00

Add to wishlist

New GM SUV/PICKUP Generic Accumulator

GM SUV/PICKUP Generic Accumulator 3.50" Diameter 10.50" Height Fitting In/Out - PAD OEM compatible part numbers: 1510639, 1511061, 40282, 11620621, 83239, 2071275, 15827280, RD1360, 1408J1501, 208450, 3723563, 83239, 170640

$32.00

Add to wishlist

New Inline Receiver Drier with #6 and #8 Male Oring

GMC Truck Aftermarket Inline Receiver Drier 2.50" Diameter 7.68" Height Fitting Inlet- #6, 3/8" Male Oring Fitting Outlet- #8, 1/2" Male Oring OEM compatible part numbers: V70966, 085247-00

$19.90

Add to wishlist

New Int/Navistar Truck Drier without Bracket

Int/Navistar Truck Drier without Bracket 3" Diameter 8" Height Fitting Inlet - Seal Washer - 440-8060 Fitting Outlet - #6, 3/8" Female Oring Inlet Tube Drop Length = 7 1/4"...

$22.80

Add to wishlist

New International Generic Drier

New International Generic Drier 4" Diameter 7.20" Height Fitting In/Out - #6 Male Oring Fuse Plug R12 and R134a Compatible Top Sight Glass OEM compatible part numbers: 1143539, 1162927, 1283028C2, 088001, 1143539

$19.90

Add to wishlist

New Isuzu Receiver Drier

Aftermarket Receiver Drier 2.50" Diameter 7.50" Height Fitting Inlet/Outlet - 16 MM - Male Insert Oring OEM compatible part numbers: 800226, 5037121991, 1412018, 8970785701, 8971181901, 8971617800, 8971751370, 8973083320, 7603, 7607, F889, 8253554

$22.50

Add to wishlist

New Isuzu Receiver Drier

Aftermarket Receiver Drier 2.25" Diameter 10.25" Height Fitting Inlet/Outlet - 16 MM - Male Insert Oring Fits Isuzu FSR, FTR, FVR, FXR Trucks OEM Compatible Part Numbers: 1-83535-080-0, 1835350800607, 7609, 8253558

$15.99

Add to wishlist

New Isuzu Receiver Drier

Aftermarket Receiver Drier 2.36" Diameter 7 5/8" Height Fitting Inlet/Outlet - 16 MM x 1.5 Sight Glass Fits Isuzu 1992-2002 NPR Trucks OEM compatible part numbers: 8-97183-124-0, 7605, 8253556

$22.50

Add to wishlist

New Isuzu Receiver Drier

Aftermarket Receiver Drier 2 3/8" Diameter 6 1/4" Height Fitting Inlet/Outlet - PAD Female Switch Port - 3/8" x 24 Top Sight Glass Isuzu FTR, FVR, FXR Trucks OEM compatible part numbers: 1-83535-095-0, 8971673420, 8971678410,...

$19.90

Add to wishlist

New Kenworth Generic Receiver Drier

Aftermarket Receiver Drier F37-1021 - Receiver Drier - Kenworth 3" Diameter 10" Height Fitting Inlet/Outlet - #8 Stat-Seal OEM compatible part numbers: F37-1021, F37-1023,

$42.93

Add to wishlist

New OE Sanden SD7H15 Double V-Belt A-C Compressor

New Genuine Sanden SD7H15 a/c compressor. A SD7H15 compressor has seven cylinders in comparison to the SD508, SD510 and SD5H14 compressors which only had five cylinders. This compressor has a...

$339.56

Add to wishlist

New OE Sanden SD7H15 Serpentine A-C Compressor

This is a genuine New Sanden SD7H15 a/c compressor. A SD7H15 compressor has seven cylinders in comparison to the SD508, SD510 and SD5H14 compressors which only had five cylinders. This...

$329.00

-28%

Add to wishlist

New Original Denso Compressor 10PA17C With Single Groove Clutch

New Original Denso Compressor 10PA17C With Single Groove Clutch CO-1032CA 1 Groove Clutch 146mm Clutch Diameter 12 Volt Coil 54mm Gauge Line Compatible with OEM part numbers: RE64024, RE46657, SE501472, TY6789, 447100-8154, 10365101, 3021981, C2672 All sales final on...

~~$229.00~~ $165.00

Add to wishlist

New Pad Mount Generic Receiver Drier

Aftermarket Receiver Drier 3" Diameter 10.50" Height Fitting Inlet/Outlet -PAD OEM compatible part numbers: F37-6002, F37-6013, ABPN83319161, 33991, 1914015, 1917005, F376002, F763013, 173021, 74R2026, RD5146400P, F998

$26.99

Add to wishlist

New Peterbilt Generic Accumulator

Aftermarket Accumulator Fits 1999-2007 Peterbilt Trucks 3.50" Diameter 8.00" Length #12 Pad Mount - Fitting Inlet #12 Pad Mount - Fitting Outlet M8 x 1.25 - Stud Thread Size OEM...

$32.99

Add to wishlist

New Peterbilt Generic Receiver Drier

Aftermarket Receiver Drier Fits trucks with day cabs only 3" Diameter 11" Height Fitting Inlet/Outlet - #8, 1/2" Stat-Seal OEM compatible part numbers: F37-6017, 170325

$32.99

Add to wishlist

New Peterbilt Generic Receiver Drier

Aftermarket Receiver Drier Fits trucks with Sleepers 3" Diameter 11" Height Fitting Inlet/Outlet - PAD OEM compatible part numbers: F37-6010, F37-6008, F37-6003, ABPN83319157, 74R2016

$22.50

-22%

New Sanden Style 4080 SD7H15 New AC Compressor with Clutch

Add to wishlist

New Sanden Style 4080 SD7H15 New AC Compressor with Clutch

New Sanden Style Compressor with Clutch Has Peterbilt and Kenworth Applications Compatible with Sanden Model Numbers: 4080, 4377 Clutch Specs: 6 Groove Pulley 125mm Diameter of Pulley 12 Volt Also...

~~$224.00~~ $173.99

Add to wishlist

New Sanden Style Model Number 4471 4735 AC Compressor

New Sanden style SD7H15 ac compressor. A SD7H15 compressor has seven cylinders in comparison to the SD508, SD510 and SD5H14 compressors which only had five cylinders. This compressor has a...

New Sanden style SD7H15 a/c compressor. A SD7H15 compressor has seven cylinders in comparison to the SD508, SD510 and SD5H14 compressors which only had five cylinders. This compressor has a...

$253.32

Add to wishlist

New Sanden Style SD7H15 Serpentine A-C Compressor

New Sanden style SD7H15 a/c compressor. A SD7H15 compressor has seven cylinders in comparison to the SD508, SD510 and SD5H14 compressors which only had five cylinders. This compressor has a...

$235.99

Add to wishlist

New Volvo Generic Receiver Drier

New Volvo Generic Drier 3" Diameter 10 1/4" Height Fitting In/Out - Flange 134 Port Sight Glass OEM compatible part numbers: 11104567, 11104567-0

$41.87

Add to wishlist

New Volvo Generic Receiver Drier

Aftermarket Receiver Drier 3" Diameter 8.50" Height Fitting Inlet/Outlet - #6, 3/8" Male Insert Oring Side Sight Glass Side Switch Port Side Moisture Indicator OEM compatible part numbers: 1620153, 803349, 6228480, 6258560,...

$28.50

Add to wishlist

New Volvo Generic Receiver Drier

Aftermarket Receiver Drier 3" Diameter 9.25" Height Fitting Inlet/Outlet - #6, 3/8" Male Insert Oring Side Sight Glass Side Switch Port Side Moisture Indicator 1/4" Male Charge Port OEM compatible part...

$26.99

Nippondenso 10PA Compressor Manifold Fitting with Rear Exit Ports

Add to wishlist

Nippondenso 10PA Compressor Manifold Fitting with Rear Exit Ports

Compressor manifold for 10PA15C and 10PA17C Denso compressors. Fits various vehicles and John Deere equipment. It includes the orings. This manifold accepts a #8 and #10 Male Oring Fittings.

$40.00

Add to wishlist

Nippondenso 10PA Compressor Manifold Fitting with Short High Pressure Relief Valve and Internal Valve

Compressor manifold for 10PA15C and 10PA17C Denso compressors. Has Short High Pressure Relief Valve and Internal Valve. Fits various vehicles and John Deere equipment. It includes the orings. This manifold...

$45.00

Add to wishlist

Nippondenso 10PA Compressor Manifold Fitting with Short High Pressure Relief Valve w/o Internal Valve

Compressor manifold for 10PA15C and 10PA17C Denso compressors. Has short pressure relief valve and without internal valve. Fits various vehicles and John Deere equipment. It includes the orings. This manifold...

$45.00

Add to wishlist

Nylon Oring Pick

Nylon Oring Pick With Santech Logo

$2.24

Add to wishlist

O-Ring Pick

$7.99

Add to wishlist

O-Ring Pick Set

O-Ring Pick Set Includes (4) different styles of picks for the removal of O-Rings

$9.99

Add to wishlist

Orifice Tube Tool Kit with Extractor and Adapters

Orifice Tube Tool Kit with Extractor and Adapters Kit Contains: (1) Drive Arbor (1) Long Reach Extender (1) Evaporator Puller Tip (1) Condenser Puller Tip (1) Extractor Tip Includes Carrying...

$34.99

Oring Compressor #8 90 Female Oring Fitting with High Side Port, Binary Switch and Pigtail

Add to wishlist

Oring Compressor #8 90 Female Oring Fitting with High Side Port, Binary Switch and Pigtail

This is a # 8 90 Degree Female Oring Fitting with high side port. It will screw onto a Sanden oring compressor discharge fitting. It includes a 10mm switch port...

$45.00

Add to wishlist

Oring Expansion Valve

Oring Expansion Valve Inlet # 6 (5/8"-18) Outlet #8 (3/4"-16) Capillary Length 356mm

$19.99

Add to wishlist

Oring Expansion Valve with Oil Line

Oring Expansion Valve with Oil Line Inlet # 6 (5/8"-18) Outlet #8 (3/4"-16) 1/4" Female Equalizer Capillary Length 16"

$22.99

-50%

Add to wishlist

Pad Mount Generic Receiver Drier

Aftermarket Receiver Drier. Has 2 - 3/8" x 24 Female Switch Ports The drier is 2.360" in diameter and 9" long. OEM compatible part numbers: 229-8997, 4448179, 423-07-31571, 22B-979-1650

~~$35.71~~ $18.00

Add to wishlist

Pag 46 Oil, Quart

FJC Pag 46 Oil R134a Synthetic Refrigerant Oil For use with : R12 & R134a Refrigerants Contains: Synthetic PAG oil and additives 1 Quart

$21.99

Add to wishlist

Pag 46, 8 Ounce Bottle

Premium Pag 46 for R134a A/C Systems. 8 FL OZ Synthetic Refrigerant Oil

$9.99

Add to wishlist

Peanut Style GM Sanden SD7 Compressor Discharge and Suction Block Fitting Set

Peanut Style Discharge and Suction Block Fittings Fits: SD7B10 7176

Charging Ports / Valves

$3.99

Add to wishlist

R-134a Low Side Valve Primary Seal Line M10-1.25 Female - Cap M8-1.0 Female

Charging Ports / Valves

$4.99

Add to wishlist

A/C Switch Conversion Fitting Converts 7/16"-20 Female Flare to 3/8"-24 Male (with valve core)

$4.25

Receiver Drier with #6 Male and Female Oring Fittings

Add to wishlist

Receiver Drier with #6 Male and Female Oring Fittings

Aftermarket Receiver Drier. Has a #6, 3/8" Female and Male Oring Fitting. The drier is 2.5" in diameter and 6" tall. OEM compatible part numbers: 82023593, 87374420, 47446235

$45.00

Add to wishlist

Receiver Drier with #6 Male and Female Oring Fittings

Aftermarket Receiver Drier with Mounting Bracket 3" Diameter 10.7" Height Fitting Inlet - #6, 3/8" Male Oring Fitting Outlet - #6, 3/8" Female Oring Top Sight Glass OEM compatible part numbers:...

$30.60

Add to wishlist

Receiver Drier with #6 Male and Female Oring Fittings

Audi and Volkswagen Aftermarket Receiver Drier 2.5" Diameter 8" Height Fitting Inlet- #6, 3/8" Male Oring Fitting Outlet- #6, 3/8" Female Oring Female Switch Port, 1/4" R12 and R134a Compatible...

$19.90

Receiver Drier with #6 Male Insert Oring Fittings

Add to wishlist

Receiver Drier with #6 Male Insert Oring Fittings

Aftermarket Receiver Drier 3" Diameter 6.25" Height Fitting Inlet/Outlet - #6, 3/8" Male Insert Oring OEM compatible part numbers: RD5-3845-0, 708237, 1411522, 936184, F240

$22.00

Add to wishlist

Receiver Drier with #6 Male Oring Fittings

Aftermarket Receiver Drier. 3" Diameter 9" Height Fitting Inlet/Outlet - #6 Male Oring OEM compatible part numbers: 1510766, 33354, 936229, 08849101, 20407205

$18.00

Add to wishlist

Receiver Drier with #6 Male Oring Fittings

Aftermarket Receiver Drier Mack Applications 3" Diameter 9" Height Fitting Inlet/Outlet- #6, 3/8" Male Oring (1) 7/16" Flare Male Switch Ports Pressure Relief Valve Moisture Indicator OEM compatible part numbers: 221RD333, JA2110, 20443719

$32.42

Receiver Drier with #6 Male Oring Fittings with Switch Port

Add to wishlist

Receiver Drier with #6 Male Oring Fittings with Switch Port

Aftermarket Receiver Drier 2 3/4" Diameter 10" Height Fitting Inlet/Outlet- #6, 3/8" Male Oring (1) 7/16" Male Switch Port OEM compatible part numbers: 4379-RD5-3569-1, JA1090

$22.99

Add to wishlist

Receiver Drier with Quick Disconnect Fittings

Aftermarket Receiver Drier Freightliner Applications (2) 7/16" Male Flare Switch Ports 3" Diameter 10" Height Fitting Inlet/Outlet - Quick Disconnect Top Sight Glass OEM compatible part numbers: RD-5-11190-0P, 74R3317, ABPN83319664, ABPN83319665

New Generic Compressor with Clutch 6 Groove Clutch 125mm Pulley Diameter 12 Volt Coil WJ Rear Head Compatible with Sanden Model Numbers: 4304, 4423, 4810 Compatible with OEM part numbers: 1521857, 204810, ABPN83301483, 10364261,...

~~$210.00~~ $150.00

Add to wishlist

Sanden 4306 New Generic AC Compressor

New Generic Compressor with Clutch 2 Groove Clutch 132mm Pulley Diameter 12 Volt Coil KCA Rear Head Compatible with Sanden Model Numbers: 4306, 4428 Compatible with OEM part numbers: 10363891,...

$271.08

-16%

Add to wishlist

New Generic Compressor with Clutch 6 Groove Clutch 125mm Pulley Diameter 12 Volt Coil Compatible with Sanden Model Numbers: 4803 Compatible with OEM part numbers: 3013271, 15759, 3627952C1, 14SD4803, C2030,...

~~$205.00~~ $160.00

-21%

Add to wishlist

Sanden 4854 New Generic AC Compressor

New Generic Compressor with Clutch 6 Groove Clutch 130mm Pulley Diameter 12 Volt Coil GZA Rear Head Compatible with Sanden Model Numbers: 4853, 4854, 4854AFT, 4898 Compatible with OEM part...

~~$209.99~~ $165.00

Add to wishlist

Sanden 4860 New Generic AC Compressor

New Generic Compressor with Clutch 2 Groove Clutch 125mm Pulley Diameter 12 Volt Coil GV Rear Head Compatible with Sanden Model Numbers: 4860 Compatible with OEM part numbers: 10310881, 3013421,...

$237.28

-47%

Add to wishlist

New Generic Compressor with Clutch 1 Groove Pulley 120mm Pulley Diameter 24 Volt Coil Compatible with Sanden Model Number: 8944 Compatible with OEM Part Number: 229-8994 All sales final on clearance compressors

~~$200.00~~ $150.00

Add to wishlist

Sanden B Rear Compressor Head

Five bolt Sanden compressor rear head. B style head. Vertical Flare 3/4" x 7/8" Fittings with R12 charging port holes. The rear head includes the necessary gasket in order to...

$35.00

Add to wishlist

Sanden C Rear Compressor Head

Five bolt Sanden compressor rear head. C style head. Vertical Tube-O'ring 1" x 14 Fittings. The rear head includes the necessary gasket in order to change the head.

$35.00

Add to wishlist

Sanden CB Rear Compressor Head

Six bolt Sanden compressor rear head. CB style head. Vertical Tube-O'ring 1" x 14. The rear head includes the necessary gasket in order to change the head.

$35.00

Add to wishlist

Sanden Compressor Head High Pressure Relief Valve

High Pressure Relief Valve Used on Sanden Compressor Heads 3/8"-24 Threads

$3.92

Add to wishlist

Sanden FL Rear Compressor Head

Five bolt Sanden compressor rear head. FN style head. Vertical O'ring 3/4" x 7/8" Fittings. The rear head includes the necessary gasket in order to change the head.

$35.00

Sanden Flex Horizontal Bolt on Manifold 1" X 14 Tube-O Fittings

Add to wishlist

Sanden Flex Horizontal Bolt on Manifold 1" X 14 Tube-O Fittings

Bolt on horizontal manifold fitting, 1"x 14 Tube- O Fittings. For use on Sanden Flex compressors with GV rear head only.

$29.99

Sanden Flex Horizontal Bolt on Manifold 3/4" x 7/8"

Add to wishlist

Sanden Flex Horizontal Bolt on Manifold 3/4" x 7/8"

Bolt on horizontal manifold fitting. Standard #8 and #10 Oring Fittings. For use on Sanden Flex compressors with GV rear head only.

$29.99

Sanden Flex Vertical Bolt on Manifold 1" X 14 Tube-O Fittings

Add to wishlist

Sanden Flex Vertical Bolt on Manifold 1" X 14 Tube-O Fittings

Bolt on Vertical manifold fitting, 1"x 14 Tube- O Fittings. For use on Sanden Flex compressors with GV rear head only.

Six bolt Sanden compressor head. WV style head. Horizontal 3/4" x 7/8" Fittings with pressure relief valve. The rear head includes the necessary gasket in order to change the head....

$40.00

Add to wishlist

SBC Long Pump Bracket Driver Side

This bracket will sit above the intake manifold for vehicles with plenty of hood clearance. For a Long water pump on a Small block Chevy motor. Bracket sits on the...

$125.00

Add to wishlist

SBC Long Pump Bracket Passenger Side

This bracket will sit above the intake manifold for vehicles with plenty of hood clearance. For a Long water pump on a Small block Chevy motor. Bracket sits on the...

$122.00

Add to wishlist

SBC Short Pump Bracket Driver Side

This bracket will sit above the intake manifold for vehicles with plenty of hood clearance. For a Short water pump on a Small block Chevy motor. Bracket sits on the driver...

Grommet

$1.05

Add to wishlist

Slim Under Dash A/C Unit for Universal Applications Including Hot Rods

A/C Under Dash Unit We are pleased to be able to offer this under dash unit at a very economical price for all our customers to be able to afford....

Springlock Repair Clamp #6 (3/8") You will need an allen key (3/32") to tighten and loosen it.

$18.00

Add to wishlist

Springlock Repair Clamp #8 (1/2")

Springlock Repair Clamp #8 (1/2") You will need an allen key (3/32") to tighten and loosen it.

$18.00

Add to wishlist

Subaru DKV14G Compressor Adapters

Subaru DKV14G Compressor Adapters These adapters adapt the DKV14G compressor for motor swaps. The adapters have a #8 (3/4"-16) and #10 (7/8"-14) male insert oring fittings and will accept a...

$85.00

Add to wishlist

T-Splicer 3 Way 12 X 12 X 10

T-Splicer 3 Way

$13.25

Add to wishlist

Teflon Seals for Rotolock Port Compressor

10 Pack of Teflon Seals for Rotolock port Sanden or York Compressor The actual seal is white. It's pictured as black so it can be shown for illustrative purposes. Type: PTFE...

$1.99

Add to wishlist

Temperature Thermometer 1-3/4" Dial

Temperature Thermometer 1-3/4" Dial (-10 to 110 Degrees C / 0 to 220 Degrees F) Length 6"

$8.50

Add to wishlist

Thermostatic Preset Switch with 24" Capillary Tube

Thermostatic (Thermostat) Switch Preset, Capillary Length: 24", Cold off 27 Deg. F, Cold On 37 Deg. F

Universal A/C Leak Detection Dye - 1 oz R-12 and R-134a Systems

$7.99

Universal Accumulator Drier with Standard Threads

Add to wishlist

Universal Accumulator Drier with Standard Threads

Accumulator Drier with standard threads Fits many applications including: Buick, Chevy and GMC Diameter: 3.50" Height: 9.5" Inlet Size: #12 (1 1/16"-14) Outlet Size: #12 (1 1/16"-14) 1/4" Male R12...

$31.90

Add to wishlist

Universal Accumulator Drier with Standard Threads

Accumulator Drier with standard threads Fits many applications including: Buick, Chevy and GMC Diameter: 3.50" Height: 8.5" Inlet Size: #12 (1 1/16"-14) Outlet Size: #12 (1 1/16"-14) 1/4" Male R12...

$31.90

Add to wishlist

Universal Accumulator Drier with Standard Threads

Accumulator Drier with standard threads Fits many applications including: Buick, Chevy and GMC Diameter: 3.50" Height: 9" Inlet Size: #12 (1 1/16"-14) Outlet Size: #12 (1 1/16"-14) 1/4" Male R12...

$31.90

Add to wishlist

Universal Binary Switch Pigtail

Universal 2 Blade Binary Switch Pigtail

$3.50

Universal Compressor Swivel Manifold with 3/4" Discharge x 7/8" Suction Ports

Add to wishlist

Universal Compressor Swivel Manifold with 3/4" Discharge x 7/8" Suction Ports

Swivel manifold with vertical oring 3/4" discharge x 7/8" suction ports. Includes mounting bolts. This swivel manifold is designed for A6 Compressors and Sanden compressor that have the GV Rear...

$37.30

Add to wishlist

Universal Condenser Bracket Mount Kit

Universal condenser mounting kit. The kit includes four straps 1.7" X 6" long with holes every 1/4 inch The mount kit will make any universal condenser installation easy. Will not...

$5.49

Add to wishlist

Universal Drier Bracket

Universal Drier Wrap Around Bracket.

$5.00

Add to wishlist

Universal Drier Clamp with Two Holes

Universal Drier Clamp with Two Holes For driers that have a diameter of 2.38-2.50"

$1.75

Add to wishlist

Universal Drier Wrap Around Clamp

Universal Drier Wrap Around Clamp For driers that have a diameter of 2.38-2.50"

$1.50

Universal GM Accumulator with Standard Threads

Add to wishlist

Universal GM Accumulator with Standard Threads

GM Accumulator Inlet Fitting: #12 (3/4") Female Insert (Accepts #12 Male Oring Fitting On Evaporator) Outlet Fitting: #12 (3/4") Female Insert that accepts a Male Oring Side of the Tube....

$29.99

Add to wishlist

Universal In Dash A/C Unit

Universal In Dash A/C Unit, Black Color Unit Specifications: Evaporator: 32 Pass 4 Way Cooling Capacity: 3300 Kcal./H Temp: Electric Thermostat Power: 12V/8.5Ax2 Air Flow: 3 Speed Weight: 4.8 Kg Max Air Volume: 390...

This is an aluminum black painted parallel flow condenser. There are mounting holes along the top, bottom and on each end. We have a set of universal condenser brackets for...

$84.99

Add to wishlist

Universal Parallel Flow 14x20 Condenser

Volvo Truck AC Receiver Drier, Generic Brand Compatible with OEM part numbers: 1089855, 1593860, 7612, 33998 Drier Specifications: Fitting Inlet: 3" Fitting Outlet: 9.25" Fitting Inlet/Outlet: #6 Male Insert Oring Male Switch Port: 1/4"...

~~$52.86~~ $25.00

Volvo Trucks Receiver Drier with #6 Male Oring Fittings and 1/4" Charge Port

Add to wishlist

Volvo Trucks Receiver Drier with #6 Male Oring Fittings and 1/4" Charge Port

New Generic Receiver Drier 2.91" Diameter 8.58" Height Fitting Inlet/Outlet - #6, 3/8" Male Oring 1/4" Male Switch Port Side Sight Glass Mounting Bracket OEM compatible part numbers: 4346256, g281550030020, 9400720,...

$37.64

Add to wishlist

Yellow GM Sealing Washer

Yellow GM Sealing Washer Color: Yellow Compressor Type: GM Type: Sealing Washer Rubber ID: 15.49mm Steel OD: 33.22mm Rubber Thickness: 3.96mm Steel Thickness: 3.05mm

$1.00

Add to wishlist

*** This is a hidden product used by Product Options App. You can modify everything except Price and Product availability. Use app settings to change the Price

$1.00

Features
Availability:
Price
Options
Actions